648104
9
Zoom out
Zoom in
Previous page
1/44
Next page
7
Installation instructions
Completing the installation
Installation test cycle
Important!
Do this before you wash any items in your washer. This is to check that your washer is installed
correctly and that it is functioning correctly prior to use.
1
Turn your washer on by pressing the POWER button.
2
Select the QUICK cycle. Ensure the drum is empty and the door closed.
3
Touch the START / PAUSE button. The machine will start to fill.
Observe the machine for any problems (eg leaking from the hoses, excess noise or vibrations).
The washer will beep and display any faults on the screen if there are any problems. Refer to
pages 29 to 31.
4
Wait until you see water in the bottom of the drum.
5
Touch START / PAUSE to stop the cycle, then press POWER to turn the machine off.
6
Press POWER again, select the SPIN cycle and touch START / PAUSE.
Check the drain hose is firmly secured to the standpipe or tub.
Observe that the machine pumps out the water, and spins.
Important!
If there are any problems, you must address these before proceeding with normal use. The washer
will automatically turn off at the end of the cycle if there are no problems.
Clothes washer safety
This clothes washer is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they are supervised
or given instructions on how to use the washer by someone responsible for their safety.
The washer should only be used for washing and rinsing of textiles where this is indicated on the
care label.
The door will be locked from the start of the cycle until the cycle is complete for safety reasons.
It is possible to open the door during the cycle under certain conditions (refer to page 15).
Never force the door open.
Keep children away from the washer while it is in operation.
Supervise children to ensure they do not play with the washer or climb inside the drum.
Do not touch the glass part of the door during a cycle as the door can become hot.
Do not open the detergent dispenser during the cycle as hot water may come out of it.
The only user-removable parts of the washer are the inlet hoses, detergent dispenser and the
pump filter. No other parts are designed to be removed by anyone other than a Fisher & Paykel
Authorised Repairer.
When disposing of the washer, it is recommended that the door is removed to avoid children
getting trapped inside, and that the electrical cable is cut off close to the washer.
9


Need help? Post your question in this forum.

Forumrules
1

Forum

fisher-and-paykel-washsmart

Reset search

  • Message reads “too full”. It is not too full but removed some items message still the same. Anything I can do or time to buy new one. It’s about 8 years old. And over the last 15 months had a lot of use as extra 3 people in household. Submitted on 1-3-2022 at 22:21

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fisher and Paykel WashSmart at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fisher and Paykel WashSmart in the language / languages: English as an attachment in your email.

The manual is 5,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info