Manual Fisher and Paykel WashSmart (page 11 of 44) (English)

648104

Zoom out

Zoom in

1/44

Before you do your first wash

Before you start, it is a good idea to go through the following checklist:

Have the packaging and transit bolts been removed?

Is the drain hose threaded through the ‘U bend‘ (with no more than 20 mm extended) and

hooked into your standpipe or tub?

Is the hot hose connected to the hot valve (colour-coded orange)? Is the cold hose connected to

the cold valve (colour-coded white)? Have the taps been turned on?

Is the machine correctly levelled, feet are locked and cabinet corners clear of the floor and walls?

Has the power cord been connected to an appropriate power supply and the power turned on?

Have you performed the installation test cycle?

We recommend you complete your first cycle with a half-load amount of detergent and without a

load in order to remove any residues remaining in the machine from the manufacturing process.

Important!

You must ensure all 4 transit bolts have been removed from your washer before you start using it.

If the transit bolts are not removed, they will damage your washer and YOUR WARRANTY WILL BE

COMPROMISED.

Message reads “too full”. It is not too full but removed some items message still the same. Anything I can do or time to buy new one. It’s about 8 years old. And over the last 15 months had a lot of use as extra 3 people in household. Submitted on 1-3-2022 at 22:21
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fisher and Paykel WashSmart in the language / languages: English as an attachment in your email.

The manual is 5,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fisher and Paykel WashSmart Manual

Product: