Manual First Alert OneLink - 1042135 (page 14 of 36) (English)

795122

Zoom out

Zoom in

1/36

Installation of Adapter Plug (Continued)

WARNING: Installation of this unit must conform to the electrical codes in your area; Article 760

of NFPA 70 (NEC), NFPA 72, NFPA 101; SBC (SBCCI); UBC (ICBO); NBC (BOCA); OTFDC (CABO),

and any other local or building codes that may apply. Wiring and installation must be performed by

a licensed electrician. Failure to follow these guidelines may result in injury or property damage.

This unit must be powered by a 24-hour, 120VAC pure sine wave 60Hz circuit. Be sure the

circuit cannot be turned o by a switch, dimmer, or ground fault circuit interrupter. Failure to

connect this unit to a 24-hour circuit may prevent it from providing constant protection.

Step 2 Turn o AC power.

Step 3 Install new mounting bracket.

Step 4 Using wire nuts, connect the power connector to the household wiring.

Step 5 Connect the black end of the appropriate Adapter Plug to the existing power connector.

NOTE: There may not be enough room for the Adapter Plug and additional wiring to ﬁt in the junction

box. If not, the old power connector must be removed and replaced with the BRK® Power Connector.

Step 6 Connect the other end of the Adapter Plug to First Alert® / BRK® Alarm.

Step 7 Check all connections. Make sure all plugs are completely connected and snapped

together. Ensure the Adapter Plug is securely connected to the existing Power Connector.

Step 8 Install the base of the Alarm to the mounting bracket.

Step 9 Restore power to the junction box.

Step 10 Test each Alarm. Press and hold the test button until the unit alarms. When testing a

series of interconnected units you must test each unit individually. Make sure all units

alarm when each one is tested.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of First Alert OneLink - 1042135 in the language / languages: English as an attachment in your email.

The manual is 1.4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

First Alert OneLink - 1042135 Manual

Product: