795122
12
Zoom out
Zoom in
Previous page
1/36
Next page
12
Set-Up & Installation (Continued)
Step 5 Position the base of the Alarm over the mounting bracket, and turn
the alarm clockwise(right) until the unit is in its place. This activates
the battery back-up. Once unit is activated, it can not be turned o.
NOTE: After you activate the Alarm, the Color Indicator Ring will power up and the Alarm will
welcome you. To program your alarm, follow the instructions provided in the Onelink app.
!
WARNING: iOS and Android device notifications require a functional
Wireless connection. For best results, recommended to use with a 802.11
b/g/n/ac router. The notifications are only as reliable as your Wireless network
and are not a substitute for a third party emergency monitoring service.
This Smoke/CO Alarm is designed to be mounted on any standard wiring junction box up to a
4-inch (10 cm) size, on either the ceiling or wall (if allowed by local codes). Read “Where to Install
This Alarm” and “Where This Alarm Should Not Be Installed” before you begin installation.
STAND-ALONE ALARM ONLY:
If you are only installing one Smoke Alarm, restore power to the junction box.
INTERCONNECTED UNITS ONLY:
If you are interconnecting multiple Smoke Alarms, repeat steps 1-5 for each Smoke
Alarm in the series. When you are finished, restore power to the junction box.
!
WARNING: Make sure the Alarm is not receiving excessively noisy power.
Examples of noisy power could be major appliances on the same circuit, power
from a generator or solar power, light dimmer on the same circuit or mounted near
fluorescent lighting. Excessively noisy power may cause damage to your Alarm.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert OneLink - 1042135 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert OneLink - 1042135 in the language / languages: English as an attachment in your email.

The manual is 1.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info