795122

First Alert OneLink - 1042135 Manual

16
Zoom out
Zoom in
Previous page
1/36
Next page
16
Installation of Adapter Plug (Continued)
!
IMPORTANT: Interconnect units within a single family residence only. Otherwise all households
will experience unwanted alarms when you test any unit in the series. Interconnected units will
only work if they are wired to compatible units and all requirements are met. This unit is designed
to be compatible with First Alert® and BRK Electronics® Models listed in the User’s Manual.
Interconnected units must meet ALL of the following requirements:
• A maximum of 18 compatible units may be interconnected (Maximum of 12 Smoke Alarms – Except Firex
®
models PG-40 and G-6).
• The same fuse or circuit breaker must power all interconnected units.
• The total length of wire interconnecting the units should be less than 1000 feet (300 meters). The interconnect wire
should be #18 gauge or larger, rated at least 300V. If an interconnect wire is not already part of your household
wiring, you will need to install one. This type of wire is commonly available at Hardware and Electrical Supply stores.
• All wiring must conform to all local electrical codes and Article 760 of NFPA 70 (NEC). Refer to
NFPA 72, NFPA 101, and/or your local building code for further connection requirements.
!
WARNING: Failure to meet any of the above requirements could damage the units and cause them
to malfunction, removing your protection. AC and AC/DC Alarms can be interconnected. Under
AC power, all units will alarm when one senses smoke. When power is interrupted, only the AC/DC
units in the series will continue to send and receive signals. AC powered Alarms will not operate.
Wireless Interconnect
Benefits of Wireless Interconnect
The wireless interconnect feature on this alarm allows you to connect each of your First Alert Onelink alarms
so when one alarm sounds, they all will sound.
!
WARNING: Install alarms and test to assure range and reliability of interconnection throughout the house.
• First Alert Onelink alarms can typically communicate with each other if they’re 50ft (15m) apart inside a home.
Keep in mind that some features of a home may reduce the interconnect range and reliability of
interconnection, including the number of floors, number/size of rooms, furniture, type of building
material,suspended ceilings, ductwork, large metallic appliances and metal studs. This kind of interference may
be fixed by adding more Onelink alarms that can route wireless signals around any various obstructions.
• Make sure you test your Onelink alarms for proper interconnection via the weekly testing.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert OneLink - 1042135 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert OneLink - 1042135 in the language / languages: English as an attachment in your email.

The manual is 1.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info