795162
66
Zoom out
Zoom in
Previous page
1/104
Next page
Page 66
Configuring Email
NETWORK SETTING
Before you configure email settings
The NVR must be connected to a local area
network (LAN) that maintains an SMTP mail server.
It must also be connected to either an intranet or
the Internet — depending on the location of the
email accounts to which the emails will be sent.
Email notifications can be sent to all designated users
when an alarm event is detected, when a motion event is
detected, or when the administrator password is changed.
To configure emails, enter the Network Settings interface:
Menu > Configuration > Network.
1. Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway,
and the Preferred DNS server.
2. Click Apply.
3. Click on Email.
4. Configure the settings according to the diagram/list below.
5. Click Apply.
Enable Server Authentication: Optional.
User name: user account of sender’s Email for
SMTP server authentification.
Password: password of sender’s Email for
SMTP server authentification.
SMTP Server IP address or host name
SMTP Port No: The default TCP/IP port used
is 25.
Enable SSL: Optional.
Sender: Name of sender.
Sender’s Address: Email address of sender.
Receiver: Name of user to be notified.
Receiver’s Address: Email addres of notified
user. Up to 3 can be configured.
Enable Attached Pictures: Enabling allows
alarm images to be attached to emails.
Interval: Time (in seconds) between two
actions of sending attached pictures.
6. Clicking Test will display one of the following messages.
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert NVR1640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert NVR1640 in the language / languages: English as an attachment in your email.

The manual is 10.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info