795162
64
Zoom out
Zoom in
Previous page
1/104
Next page
Page 64
NETWORK SETTING
Configuring SNMP
Before you start
Download the SNMP software and manage to receive device information via SNMP
port before configuring the SNMP. By setting the Trap Address, the NVR is allowed to
send the alarm even and exception message to the surveillance center.
Configuring Remote Alarm Host
Configuring the Remote Alarm Host allows the NVR to send
the alarm event or exception message to the host whenever
an alarm is triggered. The Network Video Surveillance
software must be installed.
To configure, enter the Network Settings interface: Menu >
Configuration > Network > More Settings.
1, Enter Alarm Host IP and Alarm Host Port.
2. Click Apply.
Alarm Host IP refers to the IP address of the remote
PC on which the Network Video Surveillance Software
is installed.
Alarm Host Port must be the same as the alarm
monitoring port configured in the software.
When adding a device Network Video
Surveillance Software, the multicast address
must be the same as the NVR’s multicast IP.
Configuring Multicast
Configure the Multicast to realize Live View for more than
128 connections through the network. To configure, enter
the Network Settings interface: Menu > Configuration >
Network > More Settings.
1. Set Multicast IP (address can span the Class-D IP range
of 224.0.0.0 to 239.255.255.255 — a range of 239.252.0.0. to
239.255.255.255 is recommended).
2. Click Apply.
Access the SNMP to get device status and parameter-
related information by entering the Network Settings
interface: Menu > Configuration > Network > SNMP.
1. Check Enable SNMP.
2. Configure Trap Address and Trap Port.
3. Click Apply.
NOTE:The multicast function should be supported by the
network switch to which the NVR is connected.
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert NVR1640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert NVR1640 in the language / languages: English as an attachment in your email.

The manual is 10.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info