795162
63
Zoom out
Zoom in
Previous page
1/104
Next page
Page 63
NETWORK SETTING
Configuring DDNS
To configure the Dynamic DNS (DDNS), enter the Network
Settings interface: Menu > Configuration > Network > DDNS.
NOTE:Prior registration with your ISP is required before
configuring the system to use DDNS.
1. Check Enable DDNS.
2. Select the DDNS Type (options include IPServer, DynDNS,
PeanutHull, NO-IP, and SimpleDDNS). Follow the instructions
in the table below.
3. Click Apply.
Configuring NTP Server
A Network Time Protocol (NTP) can be configured to ensure
the accuracy of system date and time. To configure, enter
the Network Settings interface: Menu > Configuration >
Network > NTP.
1. Check Enable NTP.
2. Set the Time Interval, NTP Server, and NTP Port.
3. Click Apply.
Time interval between the two synchronizing actions with
NTP server (can be set from 1 to 10080 minutes - default is
60 minutes).
IP address of NTP server
DDnS type inStructionS
IPServer Enter Server Address for IPServer.
DynDNS Enter Server Address. Enter domain obtained from DynDNS website in NVR Domain Name field.
Enter User Name and Password registered in the DynDNS website.
PeanutHull Enter User Name and Password opteained from PeanutHull website.
NO-IP Enter Server Address for NO-IP. Enter domain obtained from NO-IP website in NVR Domain Name field.
Enter User Name and Password registered in the NO-IP website.
HiDDNS Server Address of SimpleDDNS server appears by default: www.simpleddns.com.
Enter Device Domain Name. You can enter domain name directly on NVR to create a new one.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert NVR1640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert NVR1640 in the language / languages: English as an attachment in your email.

The manual is 10.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info