795162
67
Zoom out
Zoom in
Previous page
1/104
Next page
Page 67
NETWORK SETTING
Configuring NAT
Before you start
To utilize Universal Plug and Play (UPnP) on the NVR, the UPnP function must first be
enabled on the router connected to the NVR. When the network working mode of device
is set as multi-address, the Default Route of the device should be in the same network
segment as that of the LAN IP address of the router.
Universal Plug and Play (UPnP) allows the NVR to
seamlessly discover the presence of other devices on
the network and establish functional network services for
data sharing, communications, and more. Use the UPnP
function to enable the fast connection of the device to the
WAN via a router without port mapping.
To configure, access the Network Settings interface:
Menu > Configuration > Network.
1. Select NAT tab.
2. Check Enable UPnP.
3. Select Mapping Type.
NOTE:For Auto Mapping, simply choose Auto in the
Mapping Type dropdown list and click Apply. If
Auto is selected, the Port Mapping items are
read-only, and the external ports will be set by the
router automatically.
NOTE:For Manual mapping, choose Manual in the
Mapping Type dropdown list. Click the button
to activate the External Port Settings dialog box.
Configure the port settings. If Manual is selected,
you can edit the external port on your demand.
4. Click Apply.
5. Click Refresh to get the latest status of the port mapping.
NOTE:The RTSP Port number should be 554
or between 1024 and 65535 while the
other port numbers should be between
1 and 65535. The value for each must
be different.
Before you start
Make sure the router supports the
configuration of internal port and external
port in the interface of Forwarding.
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert NVR1640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert NVR1640 in the language / languages: English as an attachment in your email.

The manual is 10.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info