Manual Finicompressors Artic 134-EVO luchtdroger (page 7 of 20) (English)

456443

Zoom out

Zoom in

1/20

40069 Zola Predosa (BO) - ITALY

info@finicompressors.it

- GB -

1.2 WARNINGS

Compressed air is a highly hazardous energy source. Never work on the dryer with parts under

pressure. Never point the compressed air or the condensate drain jet towards anybody. The user is

responsible for the installation of the dryer, which has to be executed on the basis of the instructions

given in the “Installation” chapter. Otherwise, the warranty will be voided and dangerous situations

for the personnel and/or damages to the machine could occur.

Only qualified personnel can use and service electrically powered devices. Before attempting any

maintenance action, the following conditions must be satisfied :

• Ensure that no part of the machine is under voltage and that it cannot be connected to the mains.

• Ensure that no part of the dryer is under pressure and that it cannot be connected to the

compressed air system.

This refrigeration air dryer contains R134.a HFC type refrigerant fluid, not considered potential

ozone depleting. Maintenance on refrigeration systems must be carried out only by refrigeration

engineers according to local rules. R134.a may be dangerous for men only if it is present in bulk

concentrations.

In case of leaks the room is to be aired before any intervention.

Any change to the machine or to the relevant operating parameters, if not previously verified and

authorised by the Manufacturer, in addition to create the possibility of dangerous conditions it will

void the warranty.

Don’t use water to extinguish fire on the dryer on in the surrounding area.

1.3 PROPER USE OF THE DRYER

This dryer has been designed, manufactured and tested only to be used to separate the humidity normally

contained in compressed air. Any other use has to be considered improper.

The Manufacturer will not be responsible for any problem arising from improper use; the user will be in any

case responsible for any resulting damage.

Moreover, the correct use requires the respectation of the installation conditions, in particular :

• Voltage and frequency of the mains.

• Pressure, temperature and flow-rate of the incoming air.

• Ambient temperature.

This dryer is supplied tested and fully assembled. The only operation left to the user is the connection to the

plant in compliance with the instructions given in the following chapters.

The purpose of the machine is the separation of water and eventual oil particles present in

compressed air.

The dried air cannot be used for respiration purposes or for operations leading to direct contact with

foodstuff.

This dryer is nor suitable for the treatment of dirty air or of air containing solid particles.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Finicompressors Artic 134-EVO luchtdroger in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Finicompressors Artic 134-EVO luchtdroger Manual

Product: