778621
16
Zoom out
Zoom in
Previous page
1/85
Next page
4 Technical data
Cordless drill TXS
Motor voltage 10.8 V
No-load speed*
1st gear
2nd gear
0–430 rpm
0–1300 rpm
Max. torque
soft/hard screwdriving applica
tion 10/16 Nm
Adjustable torque 0.3–3.4 Nm
Chuck clamping range 1–10 mm
Max. drill diameter
Wood/metal 12/8 mm
Tool holder in drill spindle 1/4"
Weight (incl. battery pack and
chuck) as per EPTA procedure
01:2014
1.1 kg
Weight incl. battery pack and
Centrotec 0.9 kg
* Speed values based on fully charged battery
pack.
More technical data about the charg
er and the supplied battery pack can
be found on page 6.
5 Machine features
[1-1] Drilling symbol
[1-2] Torque thumbwheel
[1-3] Torque/drilling position marking
[1-4] Gear switch
[1-5] Right/left switch
[1-6] On/Off switch
[1-7] Belt clip
[1-8] Insulated gripping surfaces (grey
shaded area)
[1-9] Button for releasing the battery pack
[1-11] Bit store
[1-10] LED lamp with capacity indicator
[3A] Wall mount for charger
The specified illustrations appear at the begin
ning of the Operating Instructions.
The specified illustrations appear at the begin
ning of the Operating Instructions.
6 Operation
6.1 Changing the battery pack [2]
Battery pack is ready for use immedi
ately upon delivery and can be charg
ed at any time.
Side of the belt clip [2-1] can be re
placed when battery pack is removed.
6.2 Charging the battery pack [3]
The LED [3-1] on the charger indicates the re
spective operating status of the charger.
LED yellow - continuous
light
Charger is ready to use.
LED green - light flashes
quickly
Battery pack is charged to
maximum capacity.
LED green - light flashes
slowly
Battery pack is charged to
80% and with reduced cur
rent.
LED green - continuous light
Battery pack is charged.
LED red - light flashes
General fault indicator, e.g.
incomplete contact, short
circuit, defective battery
pack, etc.
LED red - continuous light
Battery temperature is out
side permissible limit values
(0 °C to 45 °C).
7 Settings
CAUTION
Risk of injury
Only adjust the settings when the power
tool is switched off.
7.1 Changing direction of rotation [1-5]
Switch to the left = clockwise rotation
Switch to the right = counterclockwise rota
tion
English
16
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool TXS - 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool TXS - 2021 in the language / languages: All languages as an attachment in your email.

The manual is 2.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info