574934
15
Zoom out
Zoom in
Previous page
1/90
Next page
TI 15
15
GB
6.2 Festool battery packs
Battery pack is ready for use immediately upon
delivery and can be charged at any time.
Changing the battery pack [2]
The capacity display
[1-7]
automatically displays
the charge state of the battery pack
[1-2]
when the
ON/OFF switch is actuated:
6.3 Festool charger
Charging the battery pack [3A]
The LED
[3-2]
on the charger indicates the respec-
tive operating status of the charger.
7 Settings
7.1 Changing direction of rotation [1-3]
Switch to the left = clockwise rotation
Switch to the right = counterclockwise rotation
7.2 Adjust speed/impact rate
Adjust the speed/impact rate at thumbwheel
[1-
6]
:
Setting 1 = low speed/impact rate
Setting 6 = high speed/impact rate
8 Tool holder, attachments
Festool offers attachments and tool holders for
various applications.
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festool.com".
8.1 CENTROTEC tool chuck [4]
Quick change of tools with CENTROTEC shaft
Only clamp CENTROTEC tools in CENTRO-
TEC tool chucks.
Wear gloves when replacing!
8.2 BF-TI 13 chuck [5]
Is used for clamping drill bits up to 13mm and
shaft tools.
Impact mode is automatically switched off when
the chuck is inserted.
Clamp the tool centrally in the chuck.
Pull the sleeve back to clamp the drill bit and
turn this in a clockwise direction until it locks in.
8.3 TI-FX adapter [6]
makes possible the fitting of the following attach-
ments on the power tool (sometimes an accessory).
Impact mode is automatically switched off when
the adapter is inserted.
Place the three white points in a row when posi-
tioning the adapter. If necessary, the hexagon
socket holder must be turned manually so the
adapter can be fixed.
70 - 100 %
40 - 70 %
15 - 40 %
< 15 %
Recommendation:
Charge bat-
tery pack before further use.
LED yellow - lit continuously
Charger is ready to use.
LED green - flashes quickly
Battery pack is charged to maxi-
mum capacity.
LED green - flashes slowly
Battery pack is charged with
reduced current. Li-ion is
charged to 80 %.
LED green - lit continuously
Charging is complete or is not
restarted as current charge sta-
tus is greater than 80%.
LED red - flashes
General fault indication, e.g.
incomplete contact, short circuit,
defective battery pack, etc.
LED red - lit continuously
Battery temperature is outside
the permitted range.
CAUTION
Damage to screw and/or workpiece
Adjust the speed/impact rate and impact dura-
tion to the specific application.
WARNING
Risk of injury, electric shock
Always disconnect the battery pack before any
type of work on the machine!
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool TI 15-14.4 V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool TI 15-14.4 V in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 17,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info