574934
13
Zoom out
Zoom in
Previous page
1/90
Next page
TI 15
13
GB
1.3 Emission levels
Levels determined in accordance with EN 60745 are
typically:
Vibration emission value a
h
(vector sum for three
directions) and uncertainty K measured in accor-
dance with EN 60745:
The specified emissions values (vibration, noise)
are used to compare machines.
They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
2Symbols
3Technical data
* electronically limited
Screwing with impact
Sound pressure level L
PA
= 93 dB(A)
Noise level L
WA
= 104 dB(A)
Uncertainty K = 3 dB
Screwing and drilling without impact
Sound pressure level L
PA
= 68 dB(A)
Noise level L
WA
= 79 dB(A)
Uncertainty K = 3 dB
CAUTION
When working with noise
Damage to hearing
Always use ear protection.
Drilling in metal a
h
< 2,5 m/s
2
K = 1,5 m/s
2
Screwing a
h
= 3,0 m/s
2
K = 1,5 m/s
2
Tightening screws and nuts
with maximum size
a
h
= 11,3 m/s
2
K = 3,0 m/s
2
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
Wear ear protection.
Wear protective gloves.
Wear protective goggles.
Do not throw in the household waste.
Operating mode Impact screw driver
Operating mode Screwing/Drilling without
impact
Cordless impact screw driver TI15
Motor voltage 14,4 V
Idling speed 0 - 2600 rpm
Impact rate 2400 - 3600 rpm
Max. torque Hard material (metal) 100 Nm*
Chuck clamping range 1,5 - 13 mm
Drill diameter max. Wood 13 mm
Metal 10 mm
Max. screw diameter in spruce Up to 8x160 mm
Tool holder in drill spindle 1/4 ’’
Weight without battery pack with Centrotec 1,2 kg
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool TI 15-14.4 V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool TI 15-14.4 V in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 17,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info