499181

Festool SRM 45 E-LHS 225 PLANEX Manual

16
Zoom out
Zoom in
Previous page
1/102
Next page
16
eter of the connected suction hose:
Set the correct hose diameter.
- Suction hose clogged or kinked:
Eliminate blockage or kink.
- Disposal/Filter bag full:
Change the disposal/fi lter bag.
- Filter element clogged:
Clean the fi lter element or replace if damaged
or heavily clogged.
9.2 Automatic fi lter cleaning
To maintain a constant suction power, the fi lter
element is cleaned automatically every 30 seconds
during operation.
We recommend cleaning the fi lter element com-
pletely if severely clogged:
After extracting with a disposal bag:
• Set the suction power control to the maximum
setting.
• Cover the end of the nozzle or suction hose with
your hand for 10 seconds.
NOTE
In intensive applications that generate adherent
dust, it may be necessary to clean the fi lter ele-
ment mechanically under certain circumstances
(extract). Wear a dust mask!
9.3 Changing fi lters
CAUTION
Hazardous dust!
- Do not generate clouds of dust unnecessarily.
- Always wear a P2 dust mask when working
with hazardous dust.
Changing the disposal bag
• Clean the fi lter element before changing the
disposal bag (Chap. 9.2).
• Remove the top section [Fig. 2].
• Pull the fi lter bag socket [5-2] carefully from the
intake opening [5-1].
• Close off the fi lter bag socket with the slide piece
[5-3].
• Close the disposal bag using the cord provided.
• Insert a new disposal bag [Fig. 3] in the clean
container.
• Dispose of the used bag in accordance with statu-
tory regulations.
Changing the fi lter bag
• Remove the top section [Fig. 2].
• Pull the fi lter bag socket [5-2] carefully from the
extractor opening [5-1].
• Close off the fi lter bag socket with the slide piece
[5-3].
• Insert a new fi lter bag [Fig. 4].
• Dispose of the used bag in accordance with statu-
tory regulations.
Changing the fi lter element
Never operate the machine without a fi lter ele-
ment as this may damage the motor.
• Remove the top section [Fig. 2].
• Pull the fi lter element upwards to remove [Fig.
6].
• Open the stirrup handle [6-3] and remove the
stirrup section.
• Remove the fi lter retaining disc [6-1].
• Remove the fi lter element.
Clean the fi lter seal and fi ll level tube [6-2].
• Insert a new fi lter element.
• Place the fi lter retaining disc in position.
• Replace the stirrup and secure the stirrup handle.
• Dispose of the used fi lter element in accordance
with statutory regulations.
9.4 Emptying the dust container
• Remove the top section [Fig. 2].
• Empty the extracted material.
• Clean the edge of the container and replace the
top section of the extractor.
• Clean the intake opening and the hose sleeve.
• Dispose of the extracted material in accordance
with statutory regulations.
10 Accessories
Use only original Festool accessories and Festool
consumable material intended for this machine
because these components are designed specifi -
cally for the machine. Using accessories and con-
sumable material from other suppliers will most
likely affect the quality of your working results and
limit any warranty claims. Machine wear or your
own personal workload may increase depending on
the application. Protect yourself and your machine,
and preserve your warranty claims by always using
original Festool accessories and Festool consum-
able material!
11 Disposal
Do not throw the power tool in your household
waste! Dispose of the machine, accessories and
packaging at an environmentally-responsible
recycling centre! Observe the valid national regu-
lations.
EU only: European Directive 2002/96/EC stipulates
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool SRM 45 E-LHS 225 PLANEX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool SRM 45 E-LHS 225 PLANEX in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info