499181

Festool SRM 45 E-LHS 225 PLANEX Manual

14
Zoom out
Zoom in
Previous page
1/102
Next page
14
Save all warnings and instructions for future
reference.
- The machine should only be used by appointed
persons instructed in correct machine han-
dling.
- Use original Festool accessories only.
- Warning: the machine may contain hazardous
dust. Only authorised and qualifi ed personnel
with suitable protective equipment may perform
maintenance work, including emptying the con-
tainer and changing the fi lter. Do not operate the
machine without a fully fi tted fi lter system.
- The machine is not intended for use by persons
(including children) with limited physical, sensory
or mental ability or without suffi cient experience
and/or knowledge, unless they are supervised by
a person responsible for their safety or have been
instructed on how to use the machine. Children
should always be supervised to ensure that they
do not play with the machine.
- Observe the safety requirements that apply for
the dust you intend to extract.
- Risk of explosion and fi re hazard: do not extract
sparks or hot dust, fl ammable or explosive dust
(e.g. magnesium, aluminium), fl ammable or
explosive fl uids (e.g. petrol, thinner), aggressive
fl uids/solids (e.g. acid, leach, solvent). This mo-
bile dust extractor is suitable for extracting paint
dust. Operate the machine in a well-ventilated
room!
- Pull the plug from the socket when the machine
is not in use and prior to maintenance and clean-
ing work.
- Check the plug and the cable regularly and have
them replaced by an authorised after-sales serv-
ice workshop should either become damaged.
- Always replace the mains power cable with the
type specifi ed in the manual.
- Do not damage the mains power cable (e.g. by
driving over, dragging, etc.). Do not pull the plug
from socket by the cable.
- Always use the machine socket for the purpose
specifi ed in the manual.
- Clean the integral water level fl oat regularly and
check for damage.
- Do not expose the machine to rain.
- Do not lift or transport the machine by the handle
using a crane or lifting gear.
- For reasons of safety, never operate the machine
from an unearthed socket.
6 Commissioning
WARNING
Risk of accident if the machine is operated using
unauthorised voltages or frequencies.
- The operating voltage specifi ed on the mobile
dust extractor name plate must match the
voltage of the mains power!
- Make sure that the mobile dust extractor is
switched off when plugging in the mains ca-
ble.
6.1 Assembling the machine
The parts included in the scope of delivery are en-
closed inside the dust container [1-1] on delivery
and must be removed before initial use.
• Affi x the accompanying sticker in your national
language over the text fi eld on the warning sign
[1-3].
Inserting the fi lter bag/disposal bag
• Remove the top section [Fig. 2].
• Insert the disposal bag [Fig. 3] or the fi lter bag
[Fig. 4].
• Replace the top section and close the locking
clips.
Inserting the cable hook
• Slide the cable hook [1-7] for storing the mains
power cable into the holder [1-8] from above.
6.2 Preparing for use with the PLANEX
To use the mobile dust extractor in combination
with the PLANEX:
• Fit the tool holder as described in the there en-
closed installation instructions.
• You can store sandpaper, the brush segment and
the PLANEX on the tool holder storage area.
• Only use disposal bags when performing extrac-
tion work with the PLANEX.
6.3 Switching the machine on/off
Make sure that the connected machine is
switched off before actuating the switch [1-4].
"0" switch position
Appliance socket [1-5] is disconnected from the
power, mobile dust extractor is switched off.
"MAN" switch position
Appliance socket is connected to the power, extrac-
tion motor starts.
"Auto" switch position
Appliance socket is connected to the power, extrac-
tion motor starts when the connected machine is
switched on.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool SRM 45 E-LHS 225 PLANEX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool SRM 45 E-LHS 225 PLANEX in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info