Manual Festool of 2200 eb set (page 18 of 116) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

427177

Zoom out

Zoom in

1/116

Procedure

Lay the machine on its side on a stable base.

Open the lever [14.4].

Remove the base runner [14.1].

Release the lever [14.4] again.

Insert a copying ring [14.3] in the correct posi-

tion on the router base.

Insert the tabs [14.2] on a base runner into the

router base.

Push down the base runner until it engages in

the router base.

The overhang Y of the workpiece in relation the

template [Fig. 15] is calculated as follows:

Y = ½ (diameter of copying ring minus diameter of

routing bit)

c) Edge trimming

Routing tools with a bearing guide are required

when the machine is used for edge trimming. The

machine is then guided in such a way that the

bearing guide rolls off the workpiece.

When trimming edges, always use the chip deﬂ ec-

tor KSF-OF to improve dust extraction.

d) Routing with a guide system FS

The guide system (partly as an accessory) makes

it easier to route straight grooves.

Secure the guide rail to the workpiece using

clamps [16.4].

Insert the base runner [16.3] for the guide stop

into the router base (see "Changing the base

runner").

 This base runner is offset to compensate for

the height of the guide rail.

Secure both guide rods [16.6] with the rotary

knobs [16.5] and [16.9] on the guide stop.

Unscrew the rotary knob [16.1].

Insert the guide rods [16.6] into the grooves on

the router base.

Place the router with the guide stop on the

guide rail.

If required, you can adjust the play of the guide

stop on the guide rail by adjusting the two guid-

ance jaws [16.2] with a screwdriver.

Slide the router along the guide rods until the

routing tool reaches the required distance X

from the guide rail.

Screw up the rotary knob [16.1].

Unscrew the rotary knob [16.10].

Turn the adjusting wheel [16.7] to adjust dis-

tance X more precisely.

 Hold the adjusting wheel [16.7] to turn the

scale [16.8] independently to "zero".

Screw up the rotary knob [16.10].

8.2 Changing the base runner

Festool offers special base runners (as an acces-

sory) for different applications.

Change the base runner as follows:

Lay the machine on its side on a stable base.

Open the lever [14.4].

Remove the base runner [14.1].

Release the lever [14.4] again.

Insert the tabs [14.2] on a base runner into the

router base.

Push down the base runner until it engages in

the router base.

Before using the base runner: remove the protec-

tive foil!

8.3 Aluminium processing

WARNING

Risk of accident - always perform the following

safety measures when routing aluminium:

Add a residual-current circuit-breaker (FI,

PRCD).

Connect the machine to a suitable dust ex-

tractor.

Remove dust deposits from the motor hous-

ing on a regular basis.

Wear protective goggles.

9 Accessories

For your own safety, use only original Festool ac-

cessories and spare parts.

The accessory and tool order number can be

found in the Festool catalogue or on the Internet

under „www.festool.com“.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool of 2200 eb set in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool of 2200 eb set Manual

Product: