Manual Festool of 2200 eb set (page 14 of 116) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

427177

Zoom out

Zoom in

1/116

the body leaves it unstable and may lead to loss

of control.

- Ensure that the router bit is seated ﬁ rmly and

that it runs perfectly.

- The clamping collet and locking nut must not

show any signs of damage.

- Only use tools that meet standard EN 847-1. All

Festool routing tools fulﬁ l these requirements.

- The maximum rotational speed speciﬁ ed on the

tool must not be exceeded and the rotational

speed range must be observed.

- Do not use cracked or deformed router bits.

- Do not clamp tools with an unsuitable shank di-

ameter in the clamping collet.

- Wear suitable protection such as ear protection,

safety goggles, a dust mask for work which gen-

erates dust, and protective gloves when working

with raw materials and when changing tools.

- Festool electric power tools should only be in-

stalled in work benches specially designed by

Festool. The electric power tool may become

unsafe and cause serious accident if installed

in benches from other manufacturers or self-

manufactured work benches.

5.3 Emission levels

Noise levels are measured in accordance with EN

60745:

Sound pressure level L

= 87 dB(A)

Noise level L

= 98 dB(A)

Uncertainty K = 3 dB

CAUTION

The noise produced during work can damage

your hearing.

Always use ear protection.

Overall vibration levels (vector sum for three direc-

tions) measured in accordance with EN 60745:

Vibration emission level

(3-axis) a

< 2,5 m/s

Uncertainty K = 1,5 m/s²

The speciﬁ ed emissions values (vibration, noise)

– are used to compare machines.

– They are also used for making preliminary

estimates regarding vibration and noise loads

during operation.

– They represent the primary applications of the

power tool.

Increase possible for other applications, with

other insertion tools or if not maintained adequat-

ely. Take note of idling and downtimes of machine!

6 Commissioning

WARNING

Risk of accident if the machine is operated us-

ing unauthorised voltages or frequencies.

The mains voltage and the frequency of the

power source must correspond with the spec-

iﬁ cations on the machine’s name plate.

In North America, only Festool machines with

the voltage speciﬁ cations 120 V/60 Hz may be

used.

The switch [2.2] is an on/off switch. Press the side

locking knob [2.1] to lock the switch for continu-

ous operation. Press the switch again to release

the knob.

7 Adjustments

WARNING

Risk of accident, electric shock

Always pull the plug out of the socket before

performing any type of work on the machine.

7.1 Electronics

The OF 2200 EB features full-wave electronics

with the following properties:

Smooth start-up

The electronically controlled smooth start-up

function ensures that the machine starts up

smoothly.

Speed control

You can regulate the rotational speed steplessly

between 10000 and 22000 rpm using the adjust-

ing wheel [1.11]. This enables you to optimise the

cutting speed to suit the respective material and

routing tool:

Routing tool diameter

[mm]

Recommended

cutting material

Material

10 -30 30 - 50 50 - 89

Adjusting wheel setting

Hardwood

6 - 4 5 - 3 3 - 1

(HSS)

Softwood

6 - 5 6 - 4 5 - 3

HSS

(HW)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool of 2200 eb set in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool of 2200 eb set Manual

Product: