796174
16
Zoom out
Zoom in
Previous page
1/106
Next page
Do not clamp tools with an unsuitable
shank diameter in the clamping collet.
Only use tools that meet standard
EN 847-1. All Festool routing tools fulfi l
these requirements.
Ensure that the router bit is seated firmly
and that it runs perfectly.
The clamping collet and locking nut must
not show any signs of damage
Do not use cracked or deformed router
bits.
Wear suitable personal protective equip
ment: Ear protection, protective goggles,
dust mask for work that generates dust,
protective gloves for working with rough
materials and for changing tools.
Only for AS/NZS: The tool shall always be
supplied via residual current device with a
rated residual current of 30 mA or less.
2.3 Sawing aluminium
When sawing aluminium, the following meas
ures must be taken for safety reasons:
Install an upstream residual-current circuit
breaker (RCD, PRCD).
Connect the power tool to a suitable dust
extractor with an antistatic suction hose.
Regularly clean dust deposits from the mo
tor housing on the power tool.
Wear protective goggles.
2.4 Emission levels
The levels determined in accordance
with EN 62841 are typically:
Sound pressure level LPA = 92 dB(A)
Sound power level LWA = 103 dB(A)
Uncertainty K = 3 dB
CAUTION
Noise generated when working
Risk of damage to hearing
Use ear protection.
Vibration emission level ah (vector sum for
three directions) and uncertainty K measured in
accordance with EN 62841:
ah = 5.5 m/s2
K = 2 m/s2
The specified emission levels (vibration, noise)
are used to compare machines.
They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
They represent the primary applications of
the power tool.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
The actual load during the entire operating
cycle must be evaluated.
Depending on the actual load, suitable pro
tective measures must be defined in order
to protect the operator.
3 Intended use
The router is designed for routing wood, plas
tics and wood-based materials.
If the cutters are used for the intended purpose
outlined in the Festool Sales, they may also be
used to machine aluminium and plasterboard.
This power tool may only be used by experts or
instructed persons.
The user is liable for improper or non-in
tended use.
4 Technical data
Router OF 1010 REBQ,
OF 1010 REQ
Power 1010 W
Speed 9500–23,000 rpm
Max. speed (no-load) 26,000 rpm
Quick depth adjust
ment 55 mm
Fine depth adjustment 8 mm
Drive shaft connecting
thread M16 x 1.5
Cutter diameter Max. 35 mm
Weight as per EPTA
procedure 01:2014: 3.1 kg
English
16
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool OF 1010 REQ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool OF 1010 REQ in the language / languages: All languages as an attachment in your email.

The manual is 2.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info