Manual Festool IS330EB (page 28 of 192) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

573136

Zoom out

Zoom in

1/192

This allows clean cuts by accurately guiding the

machine along a marked edge. Hard anodising

of the guide bar makes moving the machine even

easier, thus reducing the necessary slide force,

and at the same time makes for a better work-

ing procedure. The saw runner’s side clearance

can be adjusted using the distance screws in the

auxiliary handles [6-1].

10.2 Assembling the guide rail

The guide rail [7-1] is assembled using special

clamps FSZ 300 [7-2] or FS-RAPID/L [7-5] to be

inserted into the guide grooves designed for this

particular purpose (Fig. [7a]). This allows a secure

hold on uneven surfaces. Anti-slip strips are at-

tached to the bottom of the guide bar, providing

safe placement and preventing scratches to the

material surface.

CAUTION

If you cut with a tilted saw, the tool and the

clamp bolt with the gripper or with FS-RAPID/L

may collide.

 Tilt the saw at such an angle only to avoid

collision of the chain with the clamp.

10.3 Assembling the angle guide (FS-AG-2)

The combination of the guide rail and the continu-

ously adjustable angle unit [7-3] allows accurate

angular cuts, e. g., for matching ﬁ ts. Mount the

angle unit as shown in Fig. [7b]. You can set the

required cutting angle on the bevel indicator.

10.4 Assembling the connector

(FSV)

Depending on the use and size of the work piece,

multiple guide rails can be jointed together us-

ing a connecting spring [7-4] (Fig. [7c]). For ﬁ rm

connection of multiple guide rails the links can be

afﬁ xed using the screws in the correspondingly

threaded openings.

10.5 Assembling the quick clamp (FS-

RAPID/L)

The guide rail can be mounted quickly using this

device [7-5] slipped into the bottom groove. A ﬁ rm

mount is achieved by pressing the trigger, and re-

lease is achieved by pressing the stopping button.

CAUTION

If you cut with the saw at an incline, the tool and

the quick clamp handle may collide.

 The handle of the quick clamp must be turned

to the left towards the material after tighten-

ing, thus preventing the collision even at the

maximum tilt of 60°.

11 Service and maintenance

WARNING

Risk of accident, electric shock

 Always pull the plug out of the socket before

performing any type of work on the machine.

 All maintenance and repair work which re-

quires the motor housing to be opened, must

only be carried out by an authorised service

workshop.

WARNING

Caution! The chain cutting edges can cause

injury.

Caution! The cutting edges of the guide bar can

cause injury.

 Before replacing the tool cutting set, unplug

the machine.

 Wear protective gloves!

Customer service and repair. Only through

manufacturer or service workshops:

Please ﬁ nd the nearest address at:

www.festool.com/Service

EKAT

Use only original Festool spare parts! Or-

der No. at: www.festool.com/Service

The IS 330 EB insulation saw cutting tool set’s

chain links are 3/8" apart, and their thickness is

1.3 mm. Other tool sets can be used only with ex-

plicit approval from the manufacturer. The spac-

ing of the chain links must be identical to the

spacing of the chain sprocket and to the spacing

of the guide bar pulley.

The complete cutting tool set consists of:

a) chain sprocket [8-3]

b) guide bar [2-4]

c) chain [2-3]

The cutting tool set’s service life depends mainly

on lubrication and chain tension. For this reason

the chain tension must be checked and adjusted

both before and during work.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool IS330EB in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 12,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool IS330EB Manual

Product: