573136

Festool IS330EB Manual

30
Zoom out
Zoom in
Previous page
1/192
Next page
30
11.8 Lubrication and cleaning
We recommend cleaning the machine regularly.
Remove dust, cuttings, resin and other impuri-
ties. Detergents that contain solvents can harm
the painted surfaces or plastic parts. If you use
such detergents, we recommend that you fi rst
test their effect on a small hidden surface. Dur-
ing maintenance or replacement of any part of
the tool cutting set, clean the inside of the cover
by removing the accumulated dust and cuttings,
clean the guide groove, as well as the lubrication
and tension ports of the chain’s guide bar. Do not
clean the rotary suction adaptor with your fi ngers!
The motor cover’s ventilation ports must not be
blocked!
11.9 Replacing the carbon brushes
WARNING
The saw must undergo safety inspection to
maintain its protection category, and this work
must be done at an authorised facility licensed
to perform such work. Before servicing the tool,
always unplug the cord from the socket!
Have an authorised service facility handle re-
placement of the brushes, power cord, etc. If the
machine is dropped, it must be checked by an
authorised service centre to prevent any electrical
or mechanical hazard.
After approximately 200 operating hours, the
brushes must be checked. The brushes are ac-
cessible after removal of the hood. The brushes
must be replaced with new ones if they become
shorter than 5 mm.
The machine is equipped with self-detaching
brushes that come off automatically once the
minimum length is reached. Use only original-
equipment brushes!
12 Environment
Do not throw the power tool in your household
waste! Dispose of the machine, accessories and
packaging at an environmentally-responsible re-
cycling centre! Observe the valid national regula-
tions.
EU only: European Directive 2002/96/EC stipulate
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
Information on REACh:
www.festool.com/reach
13 EU Declaration of Conformity
Insulation saw Serial no.
IS 330 EB 765700
Year of CE mark: 2011
We declare under our sole responsibility that this
product is in conformity with the following stand-
ards or standardization documents:
EN 55 014-1, EN 55 014-2, EN 60 745-1, EN 60
745-2-13, EN 61 000-3-2, EN 61 000-3-3 accord-
ing to the provision of the regulations stipulated
in Directive 2006/42/EC, 2004/108/EC, 2000/14/
EC, 2011/65/EU.
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Martin Zimmer
Head of Research, Development and Technical
Documentation
20.03.2013
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool IS330EB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool IS330EB in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 12,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info