778630
25
Zoom out
Zoom in
Previous page
1/142
Next page
The power tool can be placed down flat on
the dust extraction attachment when not in
use.
Remove the sanding tool from the power
tool for transport.
9.1 Abrasive cutting
Always guide the sanding tool through the
workpiece in a straight line.
Ensure that the sanding tool does not tilt
and that it is not loaded at an angle or from
the side.
Ensure that the plate lies flat on the work
piece.
9.2 Cuts near edges [6]
WARNING
Risk of injury from exposed sanding tools
With the exception of cuts near edges, the
dust extraction attachment must only be
used in the locked position and with the
auxiliary handle.
Remove the auxiliary handle.
Check to ensure that the moving part of the
dust extraction attachment can be moved
freely using the retractor lever and that it
automatically returns to its starting posi
tion.
Hold the power tool in your right hand.
Switch on the power tool and position it
on the workpiece.
Unlock the retractor lever [6-1] for the
dust extraction attachment with your left
hand just before you reach the wall.
Use the retractor lever to retract the
moving part of the dust extraction attach
ment while continuing to cut so that you can
get as close to the wall as possible.
This ensures that the dust extraction sys
tem delivers maximum performance.
After the cutting work is complete, return
the dust extraction attachment to its start
ing position using the retractor lever.
10 Acoustic warning signal
If the power tool switches off because of subse
quent operating statuses, no warning signal
sounds when it switches on.
Battery pack not accepted
Insert the correct battery pack model.
Battery pack empty
Change the battery pack.
Charge the battery pack.
Battery pack fault
Change the battery pack.
Use the charger to check that the battery
pack is fully functional once it has cooled
down.
Battery pack overheated
Let the battery pack cool down.
Power tool overheated
The power tool must cool down before it
can be started again.
Power tool fault
Contact a Festool service workshop or spe
cialist dealer.
Power tool jammed
Eliminate the cause of the jam.
If the power tool switches off when it be
comes jammed, no warning signal sounds.
11 Accessories
Always use original Festool tools and accesso
ries. Using low-quality tools or accessories
from other manufacturers may increase the
risk of injury and seriously unbalance the ma
chine, decreasing the quality of the working re
sults and accelerating power tool wear.
Refer to the Festool catalogue for the order
numbers of accessories and tools or find them
online at www.festool.co.uk.
12 Service and maintenance
WARNING
Risk of injury, electric shock
Always remove the battery pack from the
power tool before performing any mainte
nance or service work.
All maintenance and repair work that re
quires the power tool to be opened up
should always be carried out by an author
ised service workshop.
Customer service and repairs must
only be carried out by the manufac
turer or service workshops. Find the
nearest address at:
www.festool.co.uk/service
Always use original Festool spare
parts. Order no. at:
www.festool.co.uk/service
EKAT
1
235
4
English
25
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool DSC-AGC 18 FH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool DSC-AGC 18 FH in the language / languages: All languages as an attachment in your email.

The manual is 3.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info