778630
24
Zoom out
Zoom in
Previous page
1/142
Next page
8.2 Changing the diamond cutting disc [4]
WARNING
Risk of accident, risk of injury
Only use the clamping nut provided. Do not
use quick-action clamping nuts.
Only use diamond cutting discs that are
recommended by the manufacturer and
flanges that come supplied with the sand
er.
Do not use cutting discs that contain bind
ers.
CAUTION
Risk of injury from hot and sharp tool
Do not use any vibrating, blunt or defective
sanding tools.
Do not use sanding tools that have been
exposed to extreme humidity, moisture or
high temperatures prior to installation.
Wear protective gloves.
Remove the battery pack from the power
tool.
Place the flange [4-4] with the ridge on the
spindle.
Ensure that the centring ridge of the flange
fits exactly into the opening in the disc and
that the form-fit connection between the
power tool/spindle and flange matches.
Ensure that the diameter of the power tool
spindle matches the hole in the sanding
tool.
Adhere to the stipulated rotational direction
of the sanding tool (arrow on the sanding
tool = arrow on the tool housing).
Place the diamond cutting disc [4-3] on the
spindle and flange.
Position the clamping nut [4-2] on the dia
mond cutting disc, press the spindle lock
and firmly tighten the clamping nut using
the face wrench [4-1].
Check that the sanding tool is securely at
tached and fitted to the power tool.
Before switching on the power tool,
check to ensure that the cutting disc and
the moving part of the dust extraction at
tachment [1-6] can move freely.
Let new discs run for around one minute
with no load as a test.
Removal is performed in reverse sequence to
assembly.
8.3 Plate [5]
The plate [5-1] reduces the risk of damaging
the workpiece surfaces.
Slide the plate onto the front edge of the
dust extraction attachment's guide table
and lock into place.
8.4 Dust extraction
WARNING
Heath hazard posed by dust
Always work with an extractor.
Comply with national regulations.
A Festool mobile dust extractor with a suction
hose diameter of 27 mm or 36 mm (36 mm rec
ommended due to the reduced risk of clogging)
can be connected to the extractor connec
tor [1-1].
The adapter on a suction hose with a diameter
of 27 mm is inserted into the angle adapter .
The adapter on a suction hose with a diameter
of 36 mm is attached to the angle adapter .
Recommendation: Use an antistatic extractor
hose. This helps reduce the electric charge.
9 Working with the electric
power tool
WARNING
Risk of injury
Only guide the power tool into the material
when it is switched on (running).
Always secure the workpiece in such a
manner that it cannot move.
Keep your hands away from the rotating
sanding tools.
WARNING
Risk of injury from the fragile sanding tool
Ensure that the sanding tool's expiry date
has not been exceeded.
WARNING
Risk of injury due to moving workpiece
Ensure that the workpiece is secure.
WARNING
Risk of injury from overhead work
Always wear safety glasses for overhead
work.
Wear a P2 respiratory mask.
English
24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool DSC-AGC 18 FH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool DSC-AGC 18 FH in the language / languages: All languages as an attachment in your email.

The manual is 3.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info