778812
21
Zoom out
Zoom in
Previous page
1/126
Next page
21
Increase possible for other applications, with oth-
er insertion tools or if not maintained adequately.
Take note of idling and downtimes of machine!
7 Safety elements assembly
WARNING
Risk of accident, electric shock
Always pull the plug out of the socket before
performing any type of work on the machine.
CAUTION
Always use the additional handle to guarantee
a safe, non-tiring working posture.
7.1 Additional holder
Special construction “VIBRASTOP” regulates the
vibrations with additional holder [1-14]. Addition-
al holder can be screwed from the left or right
side of gearbox.
7.2 Exhaust cover
Assembly
Before inserting the machine into the cover,
we recommend you to turn the machine case
by 180° with respect to the gearbox so that the
switch is on the right hand side.
Arrest the exhaust cover in the top position and
put in on the side, with the clamping sleeve
up. Then put the clamping neck [3-1] of the
grinder into the sleeve. Put the guiding tabs
[3-2] into the grooves on the clamping neck of
the grinder – detail [3].
Turn the grinder counter-clockwise to the suit-
able working position – cf. Fig. [4], set the cover
to the maximum cut-through and arrest in this
position.
Tighten sleeve with screw – Fig. [4 a]. When
tightening, be careful about the correct right-
angle setting of the grinder’s bearing cover in
the exhaust cover’s sleeve.
Removal
The cutting disc must be dismounted before
the disassembly of the exhaust cover.
Set the cover to a cut depth of 10 mm and put
it down with the grinder at the bottom.
Loosen screw of sleeve.
Set the cover to the top position.
Turn the guiding tab [5-1] into the groove on
the grinder’s clamping neck. The turning can
be checked – the corresponding mark is on the
side of the disc – Fig. [5].
Remove the cover from the grinder’s clamping
neck.
7.3 Dust extraction
WARNING
Dust hazard
Always work with a dust extractor.
To ensure suction, put the hose of a Festool
vacuum cleaner class L, M or H into the suction
adapter [1-12].
Warning: Always work with the suction connect-
ed. Use exclusively antistatic vacuum cleaners to
prevent discharges of static electricity in dusty
environments.
8 Diamond cutting disc
8.1 Clamping
WARNING
Do not use quick-change nuts for clamping the
disc!
WARNING
Only use diamond cutting discs recommended
by the manufacturer and the prescribed fl ang-
es included with the cover and the grinder.
-For reasons of safety, always use original Fes-
tool grinding discs!
-Sintered cutting discs must not be used!
-If the permissible revolution speed is given on
the disc, it must not be lower than the highest
no-load speed of the grinder.
-Discs with a permissible peripheral speed of 80
m/s and higher may be used.
-Test new cutting discs by letting them run for
about one minute with no load.
-Unbalanced or vibrating discs should not be
used and should be discarded.
-Protect grinding discs from shock, impact and
lubricants.
-If the grinding and cutting wheels are worn
down to the mark on the wheel guard (see the
arrow sign), they should be replaced with new
ones. This maintains the optimum grinding and
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool DSC-AG 125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool DSC-AG 125 in the language / languages: All languages as an attachment in your email.

The manual is 7.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info