498004

Festool DOMINO XL DF 700 EQ Manual

15
Zoom out
Zoom in
Previous page
1/116
Next page
DF 700 EQ
15
GB
Connecting and detaching the mains power
cable [1-17] see Fig. [2].
The switch [1-4] is an on/off switch (I = ON,
0 = OFF).
X
Peel off the protective film from the bot-
tom of the guide frame [3-4].
X
Remove the transport safety device [1-
18].
7 Settings
7.1 Electronics
The machine features full-wave electronics
with the following features:
Smooth start-up
The electronically controlled smooth start-up
ensures that the machine starts up jolt-free.
Constant speed
The motor speed remains constant through
electronic control to ensure a uniform cutting
speed even when under load.
Temperature cut-out
The machine power supply is limited and the
speed reduced if the motor exceeds a certain
temperature. The machine continues operat-
ing at reduced power to allow the ventilator
to cool the motor quickly. If the machine
temperature exceeds the maximum permit-
ted value for longer periods, the machine
switches off completely after approx. 40 sec-
onds and can only be switched on again once
the motor has cooled sufficiently.
Restart protection
The integral restart protection prevents the
machine from automatically starting up
again after an interruption in power when the
machine is used in continuous operating
mode. In this case the machine must be
switched off and then switched back on
again.
7.2 Changing tools
Removing the tool
X
Lift the unlocking device [3-2] until it au-
dibly disengages using the open-ended
spanner [3-3] supplied (SW 12).
X
Separate the motor unit [3-5] from the
guide frame [3-4].
X
Press and hold the spindle lock [4-1].
X
Loosen the cutter [4-3] using the open-
ended spanner [4-2] and remove.
X
Release the spindle lock [4-1].
Inserting the tool
X
Press and hold the spindle lock [4-1].
X
Use the open-ended spanner [4-2] to
screw on the cutter [4-3].
X
Release the spindle lock [4-1].
X
Slide the guide frame [3-4] onto the mo-
tor unit [3-5] until it audibly engages.
7.3 Setting the Mortise Depth
X
Press one or two snap buttons [1-8].
X
Set the slide for the routing depth setting
[1-7]to the desired routing depth (15 - 70
mm).
WARNING
Risk of injury, electric shock
X
Always pull the plug out of the socket be-
fore performing any type of work on the
machine!
CAUTION
Hot and sharp tools
Risk of injury
X
Wear protective gloves!
WARNING
Risk of injury
X
Before inserting a new cutter ensure that
the machine, the guide frame and the
guides [3-1] and [3-6] are clean.
X
Remove any contamination that may be
present.
X
Only use sharp, undamaged and clean
tools.
WARNING
Cutter can come out at the rear side of
the workpiece.
Risk of injury
X
Set the routing depth at least 5 mm less
than the workpiece thickness.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool DOMINO XL DF 700 EQ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool DOMINO XL DF 700 EQ in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info