498004
13
Zoom out
Zoom in
Previous page
1/116
Next page
DF 700 EQ
13
GB
Original operating manual
The illustrations specified are located at the
beginning and end of the operating manual.
1Symbols
2 Technical data
3 Machine features
4 Intended use
The machine is intended to create DOMINO
dowel connections in hard and soft wood,
chipboard, plywood and fibreboard. All appli-
cations beyond this are regarded as unin-
tended use.
The machine is designed and approved for
use by trained persons or specialists only.
The user bears the responsibility for
damage and accidents caused by im-
proper use.
1 Symbols .................................. 13
2 Technical data .......................... 13
3 Machine features ...................... 13
4 Intended use............................ 13
5 Safety instructions .................... 14
6 Operation ................................ 14
7 Settings................................... 15
8 Working with the machine.......... 17
9 Service and maintenance ........... 17
10 Troubleshooting ........................ 18
11 Accessories .............................. 18
12 Disposal .................................. 18
13 Warranty ................................. 19
14 EU Declaration of Conformity...... 19
Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
Wear ear protection.
Wear a dust mask.
Wear protective gloves.
Disconnect from the power supply!
Burning risks from hot surfaces!
Do not throw in the household waste.
Joiner DF 700 EQ
Power 720 W
Speed (no load) n
0
21000 rpm
Routing depth 15 - 70 mm
Routing width, max. 16,5 mm + Ø cutter
Ø cutter, max. 14 mm
Connecting thread of the
drive shaft
M8 x 1
Weight (excluding cable) 5,2 kg
Safety class /II
[1-1] Rubber buffer
[1-2] Stop pins
[1-3] Handles
[1-4] On/Off switch
[1-5] Display for dowel hole width
[1-6] Adjusting lever for dowel hole width
[1-7] Slide for routing depth adjustment
[1-8] Snap button for routing depth adjust-
ment
[1-9] Marker for routing depth adjustment
[1-10]Unlocking of motor unit/guide frame
[1-11]Selection slide for routing height
adjustment
[1-12]Clamp lever for routing angle adjust-
ment
[1-13]Button for releasing stop pins
[1-14]Clamp lever for routing height adjust-
ment
[1-15]Extractor connector
[1-16]Spindle lock
[1-17]Mains power cable
Joiner DF 700 EQ
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool DOMINO XL DF 700 EQ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool DOMINO XL DF 700 EQ in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info