Manual Festool CTL 48 E LE EC (page 16 of 101) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

499174

Zoom out

Zoom in

1/101

CTM 48 E LE EC, CTL 48 E LE EC

7.4 Connecting the energy box

The connection for the energy box (EAA) [1-

4] allows you to connect the mobile dust ex-

tractor with the EAA in order to couple the

automatic switch-on unit on the mobile dust

extractor with the equivalent unit on the

EAA.

7.5 Adjusting the suction power

You can use the suction power adjuster [1-

10] to adapt the machine suction power to

different applications.

7.6 Applying the brake

Folding out the black brake lever [1-15] pre-

vents the mobile dust extractor from rolling.

To achieve this, lift the front end of the mo-

bile dust extractor slightly and push the

black brake lever downwards until it latches

into place. Push the green lever [1-14] again

to release.

7.7 Temperature cut-out

A temperature cut-out switches the mobile

dust extractor off when it reaches a critical

temperature to prevent overheating.

Switch off the mobile dust extractor and

allow to cool for approx. 5 minutes.

Change the cooling air filter if necessary

(see chapter 9.2).

If the mobile dust extractor will not switch

on again, please contact a Festool service

workshop.

7.8 Changing the filter bag

(SC-FIS-

CT 48)

Removing the filter bag [4]

Open the locking clips [2-2] and remove

the top section of the machine[2-1].

Remove the filter bag.

Dispose of the used filter bag in accor-

dance with statutory regulations.

Inserting the filter bag [5]

Insert a new filter bag (SC-FIS-CT 48) in

the inlet port of the dust container and in-

terlock it.

Important:

be aware that the

locking engages.

Make sure that the filter bag is not

pinched between the top and bottom sec-

tions.

Replace the top section [2-1] and close

the locking clips [2-2].

7.9 Volumetric flow monitoring (only CTM 48 E LE EC)

An acoustic warning signal sounds if the air speed in the suction hose falls below 20 m/s.

8Working

8.1 Handling

SysDoc SYSTAINER attachment system:

A SYSTAINER can be attached to the storage

area using the four locking latches [6-1].

8.2 Extracting dry materials

Possible causes Solution

Value set on the suction power adjuster [1-

10] is too low.

Set the suction power adjuster to a higher

value (see Chapter 7.5).

Rotary knob [1-8] not set to the correct

hose diameter.

Set the knob to the correct hose diameter (see

Chapter 7.1).

Suction hose blocked or kinked. Remove blockage or kink.

Filter bag full. Insert a new filter bag (see Chapter 7.8).

Dirty main filter. Changing the main filter (see Chapter 9.1).

Monitoring electronics malfunction. Send to a Festool service workshop for repair.

Wet extraction. Functional reliability not affected, no actions

required.

CAUTION

Hazardous dust

Damage to the respiratory passage

Always use a filter bag when extracting

hazardous materials!

Do not use the machine if the volumetric

flow monitoring function is inactive.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool CTL 48 E LE EC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool CTL 48 E LE EC Manual

Product: