Manual Festool CTL 48 E LE EC (page 17 of 101) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

499174

Zoom out

Zoom in

1/101

CTM 48 E LE EC, CTL 48 E LE EC

Observe the following

when extracting

dust generated by operating electric power

tools:

If the exhaust air is discharged back into the

room, the

air renewal rate L

within the

room must be sufficient. The volume of air

discharged back into the room must not ex-

ceed 50% of the fresh air volume flow (room

volume V

x air renewal rate L

). Observe all

the relevant regional regulations.

Remember:

A moist main filter clogs more

quickly when extracting dry materials.

Therefore, dry the main filter before extract-

ing dust or replace the damp filter with a dry

one.

8.3 Extracting fluids

Before extracting fluids, remove the filter

bag (see Chapter 7.8). We recommend using

a special wet filter.

The dust extractor stops automatically when

the maximum level is reached.

8.4 After finishing work

Switch off the mobile dust extractor and

disconnect the plug.

Wind up the mains power cable.

Empty the dust container.

Only CTM 48 E LE EC:

Close off the ex-

tractor opening [1-2] using the sealing

plug [1-1].

The machine shall be stored indoors

only.

Place the mobile dust extractor in a dry

room inaccessible to unauthorised users.

9 Service and maintenance

Damaged safety devices and components

must be repaired or replaced in a recognised

specialist workshop, unless otherwise indi-

cated in the operating manual.

Observe the following instructions:

– A dust test must be performed at least

once a year by the manufacturer or an in-

structed person. This test may include

checks to determine whether the filter is

damaged, the machine is sealed properly

and the monitoring features are function-

ing correctly.

– During maintenance and repair work, all

components that cannot be cleaned satis-

factorily must be replaced. The old compo-

nents must be sealed in impermeable

plastic bags prior to disposal in compliance

with applicable regulations for this type of

waste.

– Provided maintenance personnel or other

persons in the vicinity are not endangered,

the user must dismantle and clean the ma-

chine prior to performing maintenance

work. Appropriate precautionary measures

include decontaminating the machine prior

to disassembly, making provisions for lo-

cally filtered forced ventilation at the loca-

tion of machine disassembly, cleaning the

maintenance area and appropriate person-

al protective equipment.

CAUTION

Escaping foam and fluids

Switch off the machine immediately and

empty the dirt trap.

WARNING

Hazardous dust

Damage to the respiratory passage

Wipe down the mobile dust extractor and

clean all accessories thoroughly using the

extractor (inside and out) before removing

from the working area.

Parts that you were not able to clean thor-

oughly must be sealed in an airtight plastic

bag prior to transportation.

Wear a dust mask!

WARNING

Risk of injury, electric shock

Always disconnect the mains plug from the

socket before performing maintenance

work on the machine!

All maintenance and repair work which re-

quires the motor housing to be opened

must only be carried out by an authorised

service workshop.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool CTL 48 E LE EC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool CTL 48 E LE EC Manual

Product: