Manual Festool CTL 48 E LE EC (page 14 of 101) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

499174

Zoom out

Zoom in

1/101

CTM 48 E LE EC, CTL 48 E LE EC

4Intended use

CTM 48 E LE EC:

The mobile dust extractor

is designed for extracting hazardous dusts

with limit values up to 0.1 mg/m³ and wood

dust from dust class 'M' in accordance with

IEC 60335-2-69.

CTL 48 E LE EC:

The mobile dust extractor

is designed for extracting hazardous dust

with limit values up to 1 mg/m³ and wood

dust from class 'L' in accordance with IEC

60335-2-69.

The mobile dust extractor is designed to ex-

tract water

as well as for heavy-duty applications and in-

dustrial use in accordance with IEC 60335-1

and IEC 60335-2-69.

The user bears the responsibility for

damage and accidents caused by im-

proper use.

5 Safety instructions

5.1 General safety instructions

Warning! Read all safety warnings

and all instructions.

Failure to follow the

warnings and instructions may result in elec-

tric shock, fire and/or serious injury.

Save all warnings and instructions for

future reference.

– The device is not intended for use by per-

sons (including children) with limited phys-

ical, sensory or mental ability or without

sufficient experience and/or knowledge,

unless they are supervised by a person re-

sponsible for their safety or have been in-

structed on how to use the device. Children

should always be supervised to ensure that

they do not play with the device.

– Prior to use, operating personnel must re-

ceive information and instructions on how

to use the device and handle any materials

involved as well as relevant training, in-

cluding safe procedures for disposing of

the extracted materials.

– Observe all the applicable safety regula-

tions relating to handling materials.

–

Warning:

the machine may contain haz-

ardous dust. Only authorised and qualified

personnel with suitable protective equip-

ment may perform maintenance work, in-

cluding emptying the container and

changing the filter. Do not operate the ma-

chine without a fully fitted filter system.

– When extracting hazardous dust or large

quantities of oak or beech dust, only use

the machine in combination with a single

electric or pneumatic tool.

–

Risk of explosion and fire hazard:

not extract sparks or hot dust, flammable

or explosive dust (e.g. magnesium, alu-

minium), flammable or explosive fluids

(e.g. petrol, thinner), aggressive fluids/

solids (e.g. acid, leach, solvent). The ex-

traction of wood dust is permitted. This

mobile dust extractor is suitable for ex-

tracting paint dust. Operate the machine in

a well-ventilated room (observe national

industrial safety regulations).

– Do not damage the mains power cable

(e.g. by driving over, dragging, etc.). Pro-

tect from heat, oil and sharp edges. Do not

pull the plug from the socket by the cable.

– Check the plug and the cable regularly and

have them replaced by an authorised ser-

vice workshop should either become dam-

aged. Always replace the mains power

cable with the type specified in the spare

parts list.

– Do not expose the machine to rain.

– For reasons of safety, never operate the

machine from an unearthed socket.

– Always use the machine socket for the pur-

pose specified in the manual.

– Always use original Festool accessories.

– Pull the plug from the socket when the ma-

chine is not in use and prior to mainte-

nance and cleaning work.

– Do not lift or transport the machine by the

handle using a crane or lifting gear.

– Do not insert and remove the plug under

load.

– In an emergency (e.g. short circuit or other

electrical faults occur), switch off the ma-

chine and pull out the mains plug.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool CTL 48 E LE EC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool CTL 48 E LE EC Manual

Product: