724593
24
Zoom out
Zoom in
Previous page
1/44
Next page
52cc 2 Stroke Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL: №. SBC52 • 02/2020 • 700710
(toll free)
22
other side within this line length, check the arrow on bump knob (34)
is aligned with an eyelet hole. Also check if there is a curve in the line. A
straight section of line is always better than a curved section. Remove
the line from the eyelet and retry and change the angle of entry. Slight
pressure on the bump knob (34) may also assist, depending on the curve
on the line.
5. Pull the line through the spool so both lengths
of line extending from each eyelet are the same
length. (Fig AA)
6. Rotate the bump knob (34) in a clockwise
direction; also the direction of the rotation arrow
on the bump knob (34). As the bump knob (34)
is rotated, the line will be evenly be drawn into
the spool and evenly wind the line in place.
Continue to wind the line into the spool until
approx. 100mm of line extends out from the
eyelets. (Fig AB)
NOTE: Slight downward pressure on the spool will
assist in the rotating action.
7. The spool and line is now ready for use. If the
spool & line assembly (35) was removed from
the lower shaft (15) for this process, ensure it is
correctly tted as per previous instructions.
AA.
AB.
CLOCKWISE
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex SBC52 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex SBC52 in the language / languages: English as an attachment in your email.

The manual is 6,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info