724604
19
Zoom out
Zoom in
Previous page
1/40
Next page
AFTER SALES SUPPORT
(toll free)
e-mail: help@powertoolsupport.com1800 909 909
45cc Petrol Chainsaw
MODEL: №. 53942 • 09/2018 • PM2006H
17
10848
.
10/2019
.
PM2006H
1300 889 028
info.aldi@positecgroup.com
Loosening the Chain
NOTE: Ensure the engine is switched o when
undertaking this task.
1. Ensure the chainsaw is located on a at and
secure surface.
2. Slide outward the chain drive side cover tool
free locking dial / lever (24) and then rotate
the LEVER a full 1/2 turn in an anti - clockwise
direction (Fig L).
3. To loosen the chain (20), lift and hold the chain
tensioning lock (5) and at the same time rotate
the red tool free tensioning dial (22) in an anti
-clockwise direction. When turning the red dial
anti clockwise to loosen the mechanism the
chain tensioning lock (5) will make a ratcheting
noise (Fig O).
4. After either adjustments have been made,
the chain (20) should be able to be lifted by
approx. 5mm (Fig N). The chain (20), when
tensioned correctly should be able to rotate
around the guide bar (19) without force .
5. Once you have adjusted to a suitable tension,
fully tighten chain drive side cover tool free
locking lever (24) by now rotating rmly in a
clockwise direction until secure, and then slide
the chain drive side cover tool free locking
lever (24) back to the
central position (Fig P).
Assembly
N.
L.
M.
P.O.
5MM
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex PM2006H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex PM2006H in the language / languages: English as an attachment in your email.

The manual is 10 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info