724604
18
Zoom out
Zoom in
Previous page
1/40
Next page
45cc Petrol Chainsaw
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. 53942 • 09/2018 • PM2006H
(toll free)
16
10848
.
10/2019
.
PM2006H
1300 889 028
info.aldi@positecgroup.com
8. Prior to tting the chain drive side cover (23),
you need to ensure the chain tensioner pin
(30) will locate correctly in the guide bar (19).
Before tting the chain drive side cover (23),
rotate the tool free chain tensioning dial (dark
green)(22) in an anti clockwise direction (Fig I)
until the tensioner pin (30) is fully to the right
hand side (Fig J).
9. Fit the chain drive side cover (23) over the two
studs. The chain tensioner pin (30) will now sit
on the guide bar (20) and needs to be moved
to locate in the guide bar (19). DO NOT attempt
to tighten the black locking lever (24) at this
stage.
10. Applying a downward pressure with one hand
and supporting the black locking lever (24) so
it does not rotate (Left hand in Fig K), rotate
the tool free chain tensioning dial (red) (22) in a
clockwise direction (Right hand in Fig K).
NOTE: When rotating the tool free chain
tensioning dial (22), (rotating in a clockwise
direction), there is NO NEED to hold the chain
tensioning lock.
The chain tensioner pin (30) will move forward
and suddenly drop into the hole in the guide
bar (19). Ensure the chain drive side cover (23)
has fully dropped into position and is sitting on
the bar.
11. Rotate the tool free locking dial/lever (24)
in a clockwise direction ensuring the chain
drive side cover (23) is being clamped to the
chainsaw. DO NOT fully tighten. Tighten only to
the point where the chain drive side cover (23)
is just holding the guide bar (19).
Assembly
J.
I.
K.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex PM2006H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex PM2006H in the language / languages: English as an attachment in your email.

The manual is 10 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info