779786
23
Zoom out
Zoom in
Previous page
1/27
Next page
Noise/vibration information
23
The specified total vibration value and noise emission values have been measured
according to a standardised test method (EN 62841-1 & EN 62841-2-4) and can be used
to compare power tools with one another. They can also be used for a provisional
assessment of the load.
Measured in accordance with DIN EN 62841-1 and EN 62841-2-4. The noise at your
workplace may exceed 85 dB(A); protective measures are necessary in this case (wear
suitable ear protection).
Sound pressure level LpA:80.3 dB(A)
Sound power level LwA:91.3 dB(A)
Uncertainty K: 3.0 dB(A)
Attention!
While actually using the power tool, the vibration and noise emission values may
differ from the levels specified depending on how the power tool is used, in particular
which type of workpiece is being worked on.
Try to keep vibration and noise emissions as low as possible. The following are
examples of measures you can take to reduce vibration emissions:
wearing gloves when using the tool
limiting the working hours
using accessories that are in good condition
maintaining and cleaning the device regularly
switching off the device when it is not in use
avoiding subjecting the device to excessive loads
The aforementioned values are noise emission values and therefore, do not
necessarily represent safe values for the workplace. The correlation between
emission and imission levels cannot reliably provide for a conclusion as to whether
additional precautionary measures are necessary or not.
Factors that could affect the respective imission level present at the workplace involve
the specification of the work area, the surrounding area, the duration of exposure,
other noise sources etc.
You must also observe any divergences in national regulations with respect to the
permissible workplace levels. The aforementioned information does, however, allow
the user to better assess dangers and risks.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FM 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FM 300 in the language / languages: English as an attachment in your email.

The manual is 0.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info