779786
21
Zoom out
Zoom in
Previous page
1/27
Next page
Troubleshooting
21
the multifunction tool and the accessories. Other storage locations and
transport possibilities do not adequately protect the multifunction tool.
1. Clean the multifunction tool thoroughly before storing it (see chapter “Cleaning
and maintenance”).
2. Make sure that the multifunction tool and the accessories are completely dry.
3. If possible, store or transport the clean multifunction tool and accessories in the
storage case 16 .
Troubleshooting
Some problems may be caused by minor faults that you can fix yourself. To do so,
follow the instructions in the following table.
If it is still not possible to resolve the problem with the multifunction tool, contact after
sales support.
Problem Possible cause Solution
The handle 12 or
the multifunction tool
cannot be mounted.
The thread 5 is dirty. Always keep the thread clean
as described in the chapter
“Cleaning and maintenance”.
The tool holder 6 is
damaged.
Contact the after sales support
of the manufacturer and have
the damaged or defective part
replaced.
The extractor line 14
or the dust extraction
adapter 13 is loose/
keeps falling off.
The extractor line or
the dust extraction
adapter is not properly
mounted.
Use the holding clip 15 on the
housing of the multifunction
tool to secure the extractor line.
Push the dust extraction
adapter firmly onto the
connecting nozzle of the
extractor line and turn it
anticlockwise to fix it in place.
The multifunction tool
cannot be switched on.
The On/Off switch 3
is stuck.
Keep the On/Off switch clean
as described in the chapter
“Cleaning and maintenance”.
The On/Off switch is
defective.
Contact the after sales support
of the manufacturer and have
the damaged or defective part
replaced.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FM 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FM 300 in the language / languages: English as an attachment in your email.

The manual is 0.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info