779786
22
Zoom out
Zoom in
Previous page
1/27
Next page
Technical data
22
Problem Possible cause Solution
The tool holder 6
does not move after
switching on the
multifunction tool.
There is dirt, wood
chips or other objects
located in the gap of
the tool holder.
Pull the mains cord out of the
socket and clean the gap of
the tool holder with a vacuum
cleaner if necessary.
The multifunction tool
is defective.
Please contact the after sales
support of the manufacturer.
The oscillation speed
can not be increased
or decreased.
The oscillation rate
preselector 4 is dirty.
If necessary, clean the
oscillation rate preselector and
the gap with a vacuum cleaner.
Technical data
Multifunction tool
Article number: 99148
Model / model number: FM 300 / WU5404043/WU5404044
Electrical data
Supply voltage: 230-240V~
Mains frequency: 50Hz
Power consumption: 300W
Idle oscillation rate: 15000−23000rpm
Physical data
Dimensions without accessories and cords
(L × W × H):
308 × 63 × 99mm
Oscillation angle: 3.1°
Weight without tools: 1.6kg
Noise/vibration information
WARNING!
Health hazard!
Working without ear protection and suitable protective clothing poses a health
hazard.
Wear ear protection and suitable protective clothing when working with
the device.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FM 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FM 300 in the language / languages: English as an attachment in your email.

The manual is 0.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info