779785
15
Zoom out
Zoom in
Previous page
1/44
Next page
15
c) Do not use this saw to cut rebates or
grooves. For design reasons, the saw is
not suitable for such work. The splitter
must never be removed, because it pre-
vents jamming and kickbacks.
d) Before switching on the power tool,
make sure that the saw blade does
not touch the safety guard, splitter
or workpiece. Accidental contact bet-
ween these components and the saw
blade could lead to dangerous situati-
ons.
e) Adjust the splitter in accordance with
the description in these operating
instructions. Incorrect clearances, posi-
tion or alignment may be the reason
why the splitter fails to prevent a kick-
back e ectively.
f) Use the right saw blade for the split-
ter. For the splitter to work properly,
the saw blade diameter must match the
splitter, the saw plate of the saw blade
must be thinner than the splitter and
the tooth pitch must be greater than
the thickness of the splitter.
Safety information for sawing
a) DANGER: Do not let your hands and
ngers come anywhere near the saw
blade or the sawing area. It just takes
one moment of inattention or a slip and
your hand could be directed towards
them, which could result in serious inju-
ries.
b) Only feed the workpiece to the saw
blade or cutting tool against the
direction of rotation. If the workpiece
is fed in in the same direction as the
direction of rotation of the saw blade
above the table, this could lead to both
the workpiece and your hand being
drawn in to the saw blade.
c) Never use the miter stop to feed in
the workpiece when performing
longitudinal cuts, and never use the
parallel stop in addition for setting
the length when performing cross
cuts with the miter stop. Feeding the
workpiece in with both the parallel stop
and the miter stop at the same time in-
creases the likelihood of the saw blade
getting jammed, which will result in
kickback.
d) When performing longitudinal cuts,
always apply the infeed force on the
workpiece between the stop rail and
the saw blade. Use a push stick if the
gap between the stop rail and the
saw blade is less than 150 mm, and a
push block if the gap is less than 50
mm. Work aids of this kind help ensure
that your hand is kept at a safe distance
F_TS_2000_1_GB_SPK7.indb 15F_TS_2000_1_GB_SPK7.indb 15 04.06.2019 10:19:0004.06.2019 10:19:00
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex F-TS 2000-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex F-TS 2000-1 in the language / languages: English as an attachment in your email.

The manual is 3.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info