779785
13
Zoom out
Zoom in
Previous page
1/44
Next page
13
b) Wear personal safety equipment and
always wear safety goggles. Wearing
personal safety equipment such as dust
masks, non-slip safety shoes, a helmet
or ear mu s, depending on the type
and application of the tool, reduces the
risk of injury.
c) Make sure that the tool cannot start
up accidentally. Ensure that the
power tool is switched off before you
connect it to the power supply and/
or connect the battery pack, pick it
up or carry it. If you have your  nger
on the switch while carrying the power
tool or if you connect the power tool to
the power supply while it is switched
on, this may cause accidents.
d) Remove all adjusting tools or wren-
ches before you switch on the power
tool. Any tool or wrench in a rotating
part of the power tool could cause inju-
ries.
e) Avoid abnormal working postures.
Make sure you stand squarely and
keep your balance at all times. This
will enable you to control the power
tool better in unexpected situations.
f) Wear suitable clothes. Never wear
loose fi tting clothes or jewelry. Keep
hair and clothing away from moving
parts. Loose clothing, jewelry or long
hair can be caught by moving parts.
g) If dust extraction devices and dust
collection devices can be fi tted, they
must be connected and must be used
correctly. The use of a dust extractor
can reduce the dangers posed by dust.
h) Do not allow yourself to be lulled
into a false sense of security and do
not ignore the safety regulations
covering electric power tools, even
if you are familiar with the power
tool after having used it many times.
Carelessness can lead to serious injuries
in just a fraction of a second.
4. Using and handling the power tool
a) Do not overload your power tool. Use
the correct electric tool for the job in
hand. The correct tool will enable you
to work better and more safely within
the speci c performance range.
b) Do not use an electric power tool if
the switch is defective. An electric
power tool that cannot be switched on
or o is dangerous and must be repai-
red.
c) Pull the plug out of the socket and/or
remove the removable battery pack
before making any adjustments to
the tool, changing plug-in tool parts
or putting the power tool down. The-
F_TS_2000_1_GB_SPK7.indb 13F_TS_2000_1_GB_SPK7.indb 13 04.06.2019 10:19:0004.06.2019 10:19:00
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex F-TS 2000-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex F-TS 2000-1 in the language / languages: English as an attachment in your email.

The manual is 3.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info