779785
11
Zoom out
Zoom in
Previous page
1/44
Next page
11
Safety information on the batteries
Use of the batteries
Inserting the batteries when the laser is
switched on can cause accidents.
If the equipment is not used correctly,
the batteries may leak. Avoid contact
with the battery fluid. If you come into
contact with battery fluid, clean the af-
fected body part with running water. If
you get battery fluid in your eyes, seek
immediate medical assistance.
Escaped battery fluid can cause skin
irritation and acid burns.
Never expose the batteries to excess
heat such as sunshine, fire or similar.
Never recharge batteries that are not
suitable for recharging. There is a risk of
explosion!
Keep batteries away from children, do
not short circuit batteries or disassem-
ble.
Seek a doctor’s advice immediately if a
battery is swallowed.
If necessary, clean the contacts on the
battery and equipment before inserting
the batteries.
Ensure that you insert the batteries the
right way round.
Remove flat batteries immediately from
the equipment. There is an increased
risk of leakage.
Always change all batteries in one go.
Insert only batteries of the same type,
do not use different types of batteries or
used and new batteries together.
Make sure that the equipment is swit-
ched off after use.
Remove the batteries if the equipment
is not used over a longer period.
Do not deform/damage batteries or
open them/take them apart and do not
short-circuit them.
General safety information for power
tools
Warning!
Read all the safety information, instruc-
tions, illustrations and technical data
provided on or with this power tool.
Failure to adhere to the following instruc-
tions may result in electric shock,  re and/or
serious injury.
Keep all the safety information and inst-
ructions in a safe place for future use.
The term „power tool“ used in the safety
information and instructions refers to power
tools operated from the mains power supply
(with a power cable) and to battery opera-
ted power tools (without a power cable).
F_TS_2000_1_GB_SPK7.indb 11F_TS_2000_1_GB_SPK7.indb 11 04.06.2019 10:19:0004.06.2019 10:19:00
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex F-TS 2000-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex F-TS 2000-1 in the language / languages: English as an attachment in your email.

The manual is 3.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info