632697

Ferm PGM1012 Manual

5
Zoom out
Zoom in
Previous page
1/56
Next page
EN
5
Ferm
Keep bystanders away
Do not expose to rain
Outdoor noise
Risk of high temperature
Caution: the generator contains some
parts which might reach high
temperatures

Persons
• Never allow children or people unfamiliar with
these instructions to use the appliance. Local
regulations may restrict the age of the
operator.
• Always operate outdoors with good ventilation.
Exhaust gas contains poisonous carbon
monoxide.
• Always stop the engine before refilling the fuel
tank and clean the machine after filling the fuel
tank.
• Do not inhale fumes from petrol.

• Do not touch the generator if you have wet
hands
• Do not operate the generator in wet conditions.
• Do not operate the generator near water.
• Never connect two generators together.
• Never connect the generator to any
commercial power outlet.
• Make sure any extension cords used are in a
safe condition and of sufficient capacity for the
task.
• Ensure that the load on the generator falls
within its capacity as specified in the table
before plugging in any cords.
Fire and burn hazards
• The exhaust system gets hot enough to ignite
some materials:
• keep the generator at least 1 meter away
from buildings and other equipment during
operation.
• keep flammable materials away from the
generator.
• The exhaust becomes very hot during
operations and remains hot for a while after
stopping the engine:
• Let the engine cool before storing the
generator indoors.
• Do not touch the hot exhaust with your
hands.
• Gasoline is extremely flammable and is
explosive under certain conditions. Do not
smoke or allow flames or sparks where the
generator is refueled or where gasoline is
stored.
• Fuel vapors are extremely flammable and may
ignite after the engine has started. Make sure
that any spilled fuel has been wiped up before
starting the generator.
• Never shade the generator with clothes or
other articles.
3. Use

Ground terminal
The generator ground terminal is
connected to the frame of the generator,
the metal non-current-carrying parts of
the generator, and the ground terminals of
each receptacle. Before using the ground
terminal, consult a qualified electrician,
electrical inspector or local agency having
jurisdiction for local codes or ordinances
that apply to the intended use of the
generator.

Always check the oil level (with machine in a level
position) before starting and if the engine
unexpectedly stops (fig. 2).
For general use you can use an “all temperature”
oil 10W-30
≤0ºC SAE#10
0ºC-25ºC SAE#20
25ºC-35ºC SAE#30
≥35ºC SAE#40

• Use unleaded fuel only
• Remove any power cords
• Turn power switches off
• Do not overfill – leave air gap at top of fuel level
• Always screw down fuel cap
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm PGM1012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm PGM1012 in the language / languages: English, German, Dutch, French, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 4,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info