764024
7
Zoom out
Zoom in
Previous page
1/144
Next page
7
EN
Removing
• Placethemachineonatablewiththemounting
point(3)facingupwards.
• LoosentheAllenscrew(7)usingtheAllenkey(5).
• Removethespacer(8).
• Removethesawblade(11)fromthemounting
point(3).
• Mountthespacer(8).
• TightentheAllenscrew(7)usingtheAllenkey(5).
Mounting and removing the scraping knife (fig. B)
The scraping knife must be used for scraping
applications.
Mounting
• Placethemachineonatablewiththemounting
point(3)facingupwards.
• LoosentheAllenscrew(7)usingtheAllenkey(5).
• Removethespacer(8).
• Mountthescrapingknife(12)tothemounting
point(3).
• Mountthespacer(8).
• TightentheAllenscrew(7)usingtheAllenkey(5).
Removing
• Placethemachineonatablewiththemounting
point(3)facingupwards.
• LoosentheAllenscrew(7)usingtheAllenkey(5).
• Removethespacer(8).
• Removethescrapingknife(12)fromthemounting
point(3).
• Mountthespacer(8).
• TightentheAllenscrew(7)usingtheAllenkey(5).
USE
Switching on and off (fig. A)
• Toswitchonthemachine,slidetheon/off
switch(1)tothefront.
• Toswitchoffthemachine,slidetheon/off
switch(1)totherear.
Setting the speed (fig. A)
The speed adjustment wheel is used for setting
the speed. The speed adjustment wheel can be
setto6positions.
The ideal speed depends on the application and
on the material to be worked.
Do not set the speed during use.
• Turnthespeedadjustmentwheel(2)tothe
requiredposition.
Hints for optimum use
• Clamptheworkpiece.Useaclampingdevice
for small workpieces.
• Drawalinetodefinethedirectioninwhichto
guide the accessory.
• Firmlyholdthemachinebythegrip.
• Switchonthemachine.
• Waituntilthemachinehasreachedfullspeed.
• Placetheaccessoryontheworkpiece.
• Slowlymovethemachinealongthepre-drawn
line, firmly pressing the accessory against the
workpiece.
• Donotapplytoomuchpressureonthemachine.
Letthemachinedothework.
• Switchoffthemachineandwaitforthemachine
to come to a complete standstill before putting
the machine down.
CLEANING AND MAINTENANCE
Before cleaning and maintenance, always
switch off the machine and remove the
mains plug from the mains.
• Regularlycleanthehousingwithasoftcloth.
• Keeptheventilationslotsfreefromdustand
dirt.Ifnecessary,useasoft,moistclothto
remove dust and dirt from the ventilation slots.
Replacing the accessories (fig. B)
Worn or damaged accessories must be replaced
immediately.
Only use sharp and undamaged
accessories.
• Toremovetheaccessory,proceedasdescribed
in the corresponding section.
• Tomounttheaccessory,proceedasdescribed
in the corresponding section.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm OTM1005 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm OTM1005 in the language / languages: All languages as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info