764024
5
Zoom out
Zoom in
Previous page
1/144
Next page
5
EN
aftermountingtheaccessories.Ifthemachine
vibrates strongly, immediately switch off the
machine, remove the mains plug from the
mains, and try to solve the problem.
• Makesurethattheworkpieceisproperly
supported or fixed.
• Wearsafetygoggles.Wearhearingprotection.
Wearadustmask.Ifnecessary,useother
protective means, such as safety gloves,
safety shoes, etc. Risk of personal injury.
• Keepbystandersawayfromtheworkarea.
Makesurethatallpersonsintheworkareawear
protectiveequipment.Riskofpersonalinjury.
• Keepthemainscableawayfromtherotating
accessory.Ifthemainscabletouchesthe
rotating accessory, your hands or arms may
come in contact with the accessory. Risk of
personal injury.
• Holdthemachinebytheinsulatedgripping
surfaces where the accessory may contact
hiddenwiringorthemainscable.Ifthe
accessory contacts a ‘live’ wire, the exposed
metal parts of the machine can also become
‘live’. Risk of electric shock.
• Donotusethemachinewhilecarryingitat
your side. Risk of personal injury.
• Donotusethemachinenearflammable
materials. Risk of fire.
• Bewarethattheaccessorycontinuesto
rotate for a short period after switching off
themachine.Donotattempttobringthe
accessory to a standstill yourself.
• Neverputthemachinedownonatableora
workbench before it has been switched off.
• Regularlycleantheventilationslots.Riskof
electric shock.
Electrical safety
Always check that the voltage of the
power supply corresponds to the voltage
on the rating plate.
• Donotusethemachineifthemainscableor
the mains plug is damaged.
• Onlyuseextensioncablesthataresuitablefor
the power rating of the machine with a minimum
thickness of 1.5 mm2.Ifyouuseaextension
cable reel, always fully unroll the cable.
Mains plug replacement (UK only)
Ifthemoulded3-pinplugattachedtotheunitis
damaged and needs replacing, it is important
that it is correctly destroyed and replaced by an
approvedBS1363/3Afusedplugandthatthe
following wiring instructions are followed.
The wires in the mains cable are coloured in
accordance with the following code:
blue neutral
brown live
As the colours of the wires in the mains cable
of the unit may not correspond to the coloured
markings identifying the terminals in the plug,
proceed as follows:
- Thewirewhichiscolouredbluemustbe
connected to the terminal which is marked
with the letter N or coloured black.
- Thewirewhichiscolouredbrownmustbe
connected to the terminal which is marked
withtheletterLorcolouredred.
Technical data
oTm1005
Mains voltage V~ 230
Mains frequency Hz 50
Power input W 280
No-load speed min-1 11,000 - 20,000
Weight kg 1.5
Noise and vibration
oTm1005
Sound pressure (Lpa) dB(A) 85
Acoustic power (Lwa) dB(A) 96
Uncertainty (K) dB(A) 3
Vibration (sanding on wood) m/s2 4.2
Vibration (sawing in wood) m/s2 7.3
Vibration (scraping in wood) m/s2 8.1
Vibration (sawing in steel) m/s2 5,6
Uncertainty (K) m/s2 1.5
Wear hearing protection.
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with
astandardisedtestgiveninEN60745;itmaybe
used to compare one tool with another and as a
preliminary assessment of exposure to vibration
when using the tool for the applications mentioned
- usingthetoolfordifferentapplications,orwith
different or poorly maintainted accessories,
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm OTM1005 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm OTM1005 in the language / languages: All languages as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info