Manual Ferm MSM1040 (page 15 of 160) (English, German, Dutch, French, Italian, Turkish, Spanish)

762257

Zoom out

Zoom in

1/160

fence (9) until the leg of the angle gauge is

flush with the saw blade along its entire length;

4. Retighten all four fence bolts (51) again.

Subsequently check the position of the angle

indicator (17). If necessary loosen the pointer

using a Philips screwdriver, set to position 0°

on the scale for mitre angle (16) and re-tighten

the retaining screw.

5. MAINTENANCE

Always make sure that the machine is

not connected to the mains electricity

when you carry out any maintenance of

the mechanism.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that

the ventilation openings are free of dust and

dirt. Remove very persistent dirt using a soft

cloth moistened with soapsuds. Do not use any

solvents such as gasoline, alcohol, ammonia,

etc. Chemicals such as these will damage the

synthetic components.

Cleaning the protective guards

Always check the protective guard (4) and

retractable protective guard (5) for debris before

using the machine. Remove old sawdust and

splinters using a brush or similar tool.

Replacing the table insert

Immediately replace damaged table

inserts.

With a damaged table insert (13) there is a risk of

small parts getting stuck between table insert and

saw blade, blocking the saw blade. To replace the

table insert:

1. Remove screws of table insert using a Philips

screw driver. If required, adjust mitre and bevel

angle to obtain access these screws;

2. Remove table insert;

3. Install new table insert;

4. Tighten the screws using a Philips screw

driver.

Slide rails

Dirt can damage the slide rails (25) and thereupon

the operating of the machine.

• Clean the slide rails regularly with a soft cloth;

• Drip some lubricating oil on the slide rails;

• Move the mitre saw forwards and backwards

so the oil spreads over the complete rails.

ENVIRONMENT

To prevent damage during transport the machine

is delivered in sturdy packaging. The packaging

is made of recyclable material wherever possible,

so make use of the possibility of recycling the

packaging. When you replace a machine, take the

old one to your local dealer. Here it will be dealt

with in an environmentally friendly way.

Damaged and/or disposed of electrical

or electronic devices must be dropped

off at recycling stations intended for that

purpose.

Only for EC countries

Do not dispose of power tools into domestic

waste. According to the European Guideline

2012/19/EU for Waste Electrical and Electronic

Equipment and its implementation into national

right, power tools that are no longer usable must

be collected separately and disposed of in an

environmentally friendly way.

WARRANTY

Read the warranty conditions on the separately

supplied warranty card.

The product and the user manual are subject

to change. Specifications can be changed

without further notice.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm MSM1040 in the language / languages: English, German, Dutch, French, Italian, Turkish, Spanish as an attachment in your email.

The manual is 17,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm MSM1040 Manual

Product: