388771

Ferm hdm 1017 Manual

5
Zoom out
Zoom in
Previous page
1/124
Next page
5
EN
2. SAFETY INSTRUCTIONS
Explanation of the symbols
DESCRIPTION (FIG. A)
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.
Indicates electrical shock hazard.
Wear ear and eye protection.
Wear a dust mask. Working with wood,
metals and other materials may produce
dust that is harmful to health. Do not
work with material containing asbestos.
Specific safety instructions
For use of this machine/tool:
• Inspect the surface to be drilled for hidden
electrical wiring, gas pipes or other obstacles
(for example, using a metal detector).
• Check the following points:
• Does the appliance’s voltage correspond
with the mains power supply voltage?
• Are power cords, insulation and plug in
good order: sound, not loose or damaged?
• Is there a good, rm connection at the
mains socket?
• Does the drill show any sign of abnormal
running, overheating or excessive sparking?
• Whenever any of the problems mentioned
above appear, immediately cease using the
machine and have it repaired by an expert.
• Wear ear protectors. Exposure to noise can
cause hearing loss.
• Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a “live” wire
may make exposed metal parts of the power tool
“live” and give the operator an electric shock.
Electrical safety
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of re, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Always check that the mains voltage is
the same as on the type plate of the
machine.
Class II machine - Double insulation -
You don’t need any earthed plug.
Replacement of power cords or plugs
Immediately dispose of old cords and plugs once
they have been replaced.
It is dangerous to plug a loose power cord into a
mains power socket.
Use of extension leads
Only ever use approved extension leads that are
suitable for the power rating of the machine. The
minimum core thickness is 1.5 mm
2
. Whenever
using a reel extension lead, always fully unroll the
lead.
Immediately switch off the machine when:
• Excessive sparking of the carbon brushes and
verticiliosis in the collector.
• Interruption of the mains plug, mains lead or
mains lead damage.
• Defect switch
• Smoke or stench of scorched isolation
3. OPERATING
Hammer drills require very little operator
pressure. Excessive pressure on the tool
can lead to unnecessary overheating of
the motor, and burning of the driven tool.
Auxiliary handgrip
The auxiliary handgrip can be rotated 360º
around the drill head, enabling safe and
comfortable operation, for both left and right-
handed users.
• Loosen the handgrip by turning it
anticlockwise.
• Rotate the handgrip to the desire position.
• Retighten the handgrip in the new position.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm hdm 1017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm hdm 1017 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info