Manual Ferm ETM1002 - FET 200 (page 5 of 36) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

632748

Zoom out

Zoom in

1/36

Ferm

• Always hold the tool with two hands while starting.

• Always keep the cord away from the moving parts of the machine.

• Keep your hands away from the work piece.

• In the case of jamming by a nail or staple, switch the machine off immediately and

remove the plug from the mains.

• Never aim the tool at people or animals.

• Use only staples or nails fit for this tool.

• Make sure not to damage any leads when using the tool.

Electrical safety

When using electric machines always observe the safety regulations applicable in your

country to reduce the risk of fire, electric shock and personal injury. Read the following

safety instructions and also the enclosed safety instructions.

Always check that the power supply corresponds to the voltage on the rating

plate.

Class ll machine. Your machine is double insulated; therefore no earthwire is

required.

Replacing cables or plugs

Immediately throw away old cables or plugs when they have been replaced by new ones.

It is dangerous to insert the plug of a loose cable in the wall outlet.

Using extension cables

Only use an approved extension cable suitable for the power input of the machine. The

minimum conductor size is 1.5 mm

. When using a cable reel always unwind the reel

completely.

3. USE

Application

Fig. 2

For this tool, use one of the following types staples or nails:

• U: 6, 8, 10, 12, 13 or 14 mm

• T: 14 mm

• I: 14 mm

Suitable staples and nails are provided by Esco, Rapid, Novus and Wolfcraft.

Loading the tacker

Before opening the tool, make sure the tool is disconnected.

FIN

Ferm

KONFORMITETSERKLÆRING (DK)

Vi erklærer under almindeligt ansvar, at dette

FET-200

er i overensstemmelse med følgende standarder eller normative dokumenter:

EN50144-1, EN50144-2-16, EN51044-1, EN51044-2, EN61000-3-2, EN61000-3-3

i overenstemmelse med direktivreglerne

98/37/EC, 73/23/EEC, 89/336/EEC, 2002/95/EC, 2002/96/EC

Fra 01-10-2006

ZWOLLE NL

J.A. Bakker - van Ingen J. Lodewijk

CEO Ferm BV Quality Manager Ferm Global

Vores firmapolitik bygger på løbende forbedring af vores produkter, og vi forbeholder os retten

til at ændre produktspecifikationer uden varsel.

Ferm BV • Lingenstraat 6 • 8028 PM Zwolle • Holland

FIN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm ETM1002 - FET 200 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm ETM1002 - FET 200 Manual

Product: