Manual Ferm ETM1002 - FET 200 (page 7 of 36) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

632748

Zoom out

Zoom in

1/36

Ferm

Repairs and servicing should only be carried out by a qualified technician or

service firm.

Cleaning

Regularly clean the device’s casing with a soft cloth, preferably after each use. Keep the

fan slits free of dust and dirt. Remove stubborn dirt using a soft cloth, dampened with

soapy water. Do not use solvents such as benzene, alcohol, ammonia, etc., which might

damage the plastic parts.

Defects

If a defect appears due to a part wearing out, please contact the service center on the

warranty card. At the end of these instructions there is an exhaustive overview of the parts

that can be ordered.

Environment

To prevent damage during transport, the appliance is delivered in a solid packaging which

consists largely of reusable material. Therefore please make use of options for recycling

the packaging.

Damaged and/or disposed of electrical or electronic devices must be dropped

off at recycling stations intended for that purpose.

Warranty

Read the warranty conditions on the separately supplied warranty card.

• In case a staple or nail

is jammed in the tool,

follow the procedure

below

• Disconnect the tool. • Carefully remove the

staple or nail from the

tool with a thin object

(for example a knife).

FIN

Ferm

3. BRUG

Brugsområde

Fig. 2

Brug til dette redskab en af de følgende typer hæfteklammer eller søm:

• U: 6, 8, 10, 12, 13 eller 14 mm

• T: 14 mm

• I: 14 mm

Passende hæfteklammer og søm leveres af Esco, Rapid, Novus og Wolfcraft.

Ladning af hæftemaskinen

Før åbningen af redskabet, forsikre Dem om at at redskabet ikke er sluttet til

strømforsyningen.

For at lade hæftemaskinen

Fig. 3 - 5

Åbning af glideren

• Drej metalpladen bagved bort fra glideren for at åbne for glideren

Placering af hæfteklammer

• Tag glideren ud af maskinen.

• Placer hæfteklammerne eller sømmene i magasinet

Placering af hæfteklammer

• Sæt glideren tilbage I redskabet.

• Lås glideren fast ved at fæstne metalpladen bagved.

For at bruge hæftemaskinen

Fig. 6 - 8

Placering af redskabet

• Tryk redskabet fast ned.

Tryk sikkerhedspalen ind

• Tryk sikkerhedspalen ind og hold den i trykket ind

Hæftning

• Tryk på kontakten

Redskabet vil give et tilbageslag på grund af den kraft det arbejder med. Husk

på det.

FIN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm ETM1002 - FET 200 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm ETM1002 - FET 200 Manual

Product: