Manual Ferm ETM1002 - FET 200 (page 4 of 36) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

632748

Zoom out

Zoom in

1/36

Ferm

FIN

Ferm

2. SAFETY INSTRUCTIONS

Explanation of the symbols

Carefully read the instructions.

In accordance with essential applicable safety standards of European

directives.

Class II machine – Double insulation – You don’t need any earthed plug.

Denotes risk of personal injury, loss of life or damage to the tool in case of non-

observance of the instructions in this manual.

Indicates the presence of an electrical voltage.

Immediately unplug the plug from the mains electricity in the case that the cord

gets damaged and during maintenance.

Wear eye protection.

Faulty and/or discarded electrical or electronic apparatus have to be collected

at the appropriate recycling locations.

Specific safety instructions

Before using the tacker

• Check the following points:

• Do the voltage of the engine and the engine safe-guard, if any, correspond to the

mains voltage (appliances for a mains voltage of 230 V);

• Are the mains lead and the mains plug in a good condition: solid, without any

loose ends or damage.

• Always wear eye protection when using the tool.

• Maintain the tool with care.

• Check for misalignment or binding of moving parts, breakage of parts, and any other

condition that may affect the tools operation. If damaged, have the tool serviced

before using.

• Check if the slide cartridge has been fastened properly.

• Do not use the tool in a humid environment.

• Do not use the tool on materials containing asbestos.

Using the tool

• Do not use the tool if the switch does not turn it "ON" or "OFF".

FIN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm ETM1002 - FET 200 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm ETM1002 - FET 200 Manual

Product: