763696
15
Zoom out
Zoom in
Previous page
1/28
Next page
15
EN
Before proceeding to your job, read the
section “Sefety Instructions”. It is
recommended to first practice sawing
easy logs. This also helps you get
accustomed to your unit.
Always follow the safety regulations. The
chain saw must only be used for cutting
wood. It is forbidden to cut other types
of material. Vibrations and kickback vary
with different materials and the
requirements of the safety regulations
would not be respected.
Do not use the chain saw as a lever for
lifting, moving or splitting objects. Do not
lock it over fixed stands. It is forbidden to
hitch tools or applications to the PTO
other than those specified by the
manufacturer.
It is not necessary to force the saw into
the cut. Apply only light pressure while
running the engine at full throttle.
When the saw chain is caught in the cut,
do not attempt to pull it out by force, but
use a wedge or a lever to open the way.
This saw is equipped with a chain brake
that will stop the chain in the event of
kickback if operating prop¬erly. You
must check the chain brake operation
before each usage by run¬ning the saw
at full the throttle for I ¬2 seconds and
pushing the front hand guard forward.
The chain should stop immediately with
the engine at full speed. If the chain is
slow to stop or does not stop, replace
the brake band and clutch drum before
use.
It is extremely important that the chain
brake be checked for proper operation
before each use and that the chain be
sharp in order to maintain the kickback
safety level of this saw. Removal of the
safety devices, inadequate maintenance,
or incorrect replacement of the bar or
chain may increase the risk to serious
personal injury due to kickback.
General guidelines for felling trees
Never cut with the nose of the guide bar.
Danger of kickback.
Felling can start only under the condition
that an escape route from the felling tree
is provided.
When you fell a tree, be sure to warn
neighboring workers of the danger.
Never cut a tree during winds.
Always ensure your foothold. Do not
stand on the log.
Be alert to the rolling over of a cut log.
Especially when working on a slope,
stand on the uphill side of the log.
Follow the instructions in “Safety
Instructions” to avoid kickback of the
saw.
In the area of felling trees, there must not be
any other persons or animals.
The safety distance from the tree being felled
is minimally 2½ x the length of the tree.
The direction of the fall is controlled by the
notching cut.
The escape route should lead ca 45° obliquely
back.
For the direction of the tree fall, these factors
are also important:
- Natural lean of the tree,
- Height of the tree,
- Large amount of branches,
- Location on flat land or slope,
- Asymmetric growth, damaged wood,
- Direction and velocity of air,
- Snow on the branches.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm CSM1045 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CSM1045 in the language / languages: English as an attachment in your email.

The manual is 6,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info