Manual Ferm CRM1045 (page 8 of 64) (English, German, Dutch, French, Polish)

632691

Zoom out

Zoom in

1/64

4. MAINTENANCE

Make sure that the plug is removed from

the mains when carrying out

maintenance work on the motor.

The machine has been designed to operate

over a long period of time with a minimum of

maintenance. Continuous satisfactory operation

depends upon proper machine care and regular

cleaning. Before interfering in any way whatsoever

withthecompressor,pleasemakesurethat:

• Theswitchbuttonisinthe“0”positionandthe

power plug is removed from the power socket

• Theairtankisfullydecompressed(both

pressure gauges must be pointed at 0 Bar)

Malfunction

Shouldthemachinefailtofunctioncorrectly,a

number of possible causes and the appropriate

solutionsaregivenbelow:

Air loss

• Maybecausedbyapoorsealofaconnection.

 • Checkallairconnectionsbywettingthem

with a soapy water solution ( Never use the

solution nearby electric connections )

 • Whenthetankisemptyandbeingfilled.

The user might hear a sisseling sound by

the pressure switch. This is normal and

will stop before the compressor reach a

pressure of 1.5 bar

 • Checkifthedrainvalve(14)isclosedwell

The compressor will not start

• Ifthecompressorisdifficulttostart,check:

 • whetherthevoltageofthemainscorre-

sponds to that on the specification plate

(fig. 10)

 • whetherelectricalextensioncablesare

being used with a faulty core or length.

 • whethertheoperatingenvironmentistoo

cold(below0°C).

 • whetherthereiselectricitysupply(plug

properly connected, magneto-thermal

fuses not broken).

The compressor does not shut off

Ifthecompressordoesnotshutoffwhenthe

maximumpressurehasbeenreached,thesafety

valveofthetankwillbeactivated.Itisnecessary

to contact the nearest authorised Support Service

for the repair.

Repairs and servicing should only be

carried out by a qualified technician or

service firm.

Cleaning

Regularly clean the machine housing with a

softcloth,preferablyaftereachuse.Keepthe

ventilation slots free from dust and dirt.

Ifthedirtdoesnotcomeoffuseasoftcloth

moistened with soapy water. Never use solvents

suchaspetrol,alcohol,ammoniawater,etc.

These solvents may damage the plastic parts.

Drain the tank

Compressing air will cause water in the tank.

Regularly drain the water from the tank to prevent

tankcorrosion(fig16):

• Firstreducethepressureinthetanktill

aprroxially 2 bar by connecting and activating

an air tool .

• Thenslowlyturnthedrainvalve(14)onthe

lower side of the tank open.

• Thewaterinthetankwillnowleakoutofthe

tank

Take care when compressed air is in the tank

because the water can come out with some force.

Recommended pressure max. 1-2 Bar.

Clean the air filter

Itisrecommendedtodisassemblethesuction

filter every 50 operating hours and to clean the

filter element by blowing it with compressed air

(fig.15).Itisrecommendedthatthefilterelement

is replaced at least once a year if the compressor

is working in a clean environment; more often

if the environment in which the compressor is

situated is dusty.

Replacing/topping up oil

The compressor has been supplied with synthetic

oil“SAE10W30”.Itisrecommendtofully

replace the oil of the pump system within the first

100 operating hours.

• Unscrewthedrainplug(gauge)(13)onthe

sumplid,letalltheoilrunoutandscrewback

the plug (fig. 17).

• Filltheoilviatheupperholeofthesumplid

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CRM1045 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 6,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm CRM1045 Manual

Product: