Manual Ferm CRM1041 (page 6 of 36) (English, German, Dutch, French, Italian, Spanish)

632694

Zoom out

Zoom in

1/36

Ferm

parts to avoid burns (fig. 12-13).

• Transport the compressor by lifting it or by

using the special grips or handles (fig. 5-6).

• Children and animals should be kept far away

from the area of operation of the machine.

• If you use the compressor to spray paint:

a) Do not work in enclosed spaces or near naked

flames.

b) Make sure that the environment in which you

will be working has dedicated ventilation.

c) Protect your nose and mouth with a dedicated

mask (fig. 21).

• Do not use the compressor when the electrical

cable or the plug is damaged, and instruct an

authorized Support Service to replace them

with an original part.

• When the compressor is placed on a surface

higher than the floor, it should be secured to

prevent it from falling down during operation.

• Do not put objects or your hands in the

protective covers to avoid physical damage

and damage to the compressor.

• Do not use the compressor as a blunt

instrument against persons, objects or

animals in order to prevent serious damage.

• If the compressor is no longer in use, always

take the plug out of the plug socket.

• Always make sure that compressed-air hoses

are used for compressed air and which are

characterized by a maximum pressure

adjusted to that of the compressor. Do not try

to repair the hose if it is damaged.

Electrical safety

Earthing regulations

This compressor has to be earthed while in use in

order to protect the operator against electrical

shocks. The compressor is provided with a two-

core cable plus an earth. The electrical connection

has to be made by a qualified technician. We

recommend never disassembling the compressor

and neither making any other connections into the

pressure regulator. Repairs should be carried out

by authorised Support Services or by other

qualified centres.

Never forget that the earthing core is the

green or the yellow/green wire. Never

connect this green wire to a terminal

under load.

Before replacing the plug of the feed, make sure

that the earth cable is connected. If in doubt,

please call in a qualified electrician and have the

earthing checked.

Electrical connection

Always check whether the input voltage of the

motor corresponds to the mains voltage indicated

on the specification plate. The compressors are

supplied with an electrical cable and a two-pole

plug + earth. It is important to connect the

compressor with an earthed plug socket. (fig. 9)

Never use the earth-wire instead of the

neutral (0-wire). The earthing should take

place in accordance with accident

prevention regulations.

Power supply

• The motor is fitted with an overload switch

(15). If the compressor overloads, the

overload switch switches the equipment off

automatically to protect the compressor from

overheating. If the overload switch triggers,

switch off the compressor using the ON/OFF

switch (8) and wait until the compressor cools

down. Then press the overload switch (15)

and restart the compressor.

3. Use

For household use only

NB: The information you will find in this manual

has been written to assist the operator in the use

and maintenance of the compressor. Some

illustrations in this manual show details which may

differ from those of your compressor.

Installation

After having taken the compressor out of its

packaging (fig. 1) and having checked that it is in

perfect condition, and having noted that no

damage occurred during transport, the following

acts should be performed. If not yet fitted, fit the

rubber feet and the wheels on the tank according

to the instructions represented in fig. 2. Place the

compressor on a flat surface or at a maximum

slope of 10° (fig.3), in a well ventilated area,

protected against atmospheric factors and not in

explosive surroundings. If the surface area is

CRM1041 Ma 1403-18.indd 6 4/24/14 10:16 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CRM1041 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 9,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm CRM1041 Manual

Product: