632791
15
Zoom out
Zoom in
Previous page
1/60
Next page
Ferm 15
Adjusting the speed
Fig. O
The machine can operate at various speeds. For sawing thick metal, choose one of the two high
speeds. For sawing thin metal, choose the low speed.
Slacken the screw (42).
Open the cover (43).
Slacken the nuts (44) a few threads.
Slacken the tightening screw (45) a few threads to release the tension.
For sawing at high speed, place the V-belt (46) over one of the front pairs of rollers (47 &
48).
For sawing at low speed, place the V-belt (46) over the rear pair of rollers (49).
Tighten the tightening screw as much to tension the V-belt.
Tighten the nuts.
Close the cover.
Replace the screw (42).
Before tightening the V-belt, make sure that the machine is switched off and
unplugged.
Lubrication
Fig. L
Regularly apply a drop of oil to lubricate the guide rollers on the saw band guides.
Transporting the machine
Fig. P
Remove the lock screw (50).
Align the eye (51) of the link (52) with the threaded hole (53) so that the head is locked in the
lowest position. Keep the chain as short as possible.
Replace the lock screw.
Carry the machine at the table (17) while transporting the machine.
Make sure that the plug is removed from the mains when carrying out maintenance
work on the motor.
The machines have been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper machine care and
regular cleaning.
Cleaning and maintenance
The machine does not require any special maintenance.
Regularly clean the ventilation slots.
5. SERVICE & MAINTENANCE
GB
D
NL
F
E
P
I
S
SF
N
DK
106
Ferm
METALBÅNDSAV
Tallende i den følgende tekst korresponderer med afbildningerne på side 2 -7
Advarsel!
Brugsanvisningen til elektriske maskiner skal altid gennemlæses før
brug. På den måde får du bedre kendskab til produktet og undgår unødige risici.
Gem denne brugsanvisning et sikkert sted til senere brug.
Indhold
1. Tekniske specifikationer
2. Sikkerhedsforskrifter
3. Montage og indstillings forskrifter
4. Anvendelse
5. Fejlfinding
Produktinformation
Fig. 1
Der må ikke benyttes savklinger, som er beregnet til at skære i træ.
1 Tænd/sluk-kontakt
2 Befæstigelseshul
3 Savklinge
4 Savklingebeskyttelse
5 Savklingehylster
6 Dæksel
7 Højdeindstiller til øverste savklingehjul
8 Låseknap til smigvinkel
9 Skruestik
10 Længdestop
11 Stativ
Netspænding 230V
Netfrekvens 50Hz
Effektoptagelse 400W
Ubelastet omdrejningstal 20/29/50 m/min
Maks. savdybde 90x120mm
Max. savekapacitet 90º Ø90 mm; 90 x 85 mm
Max. savekapacitet 45º Ø40 mm; 38 x 38 mm
Savklingelængde 1300mm
Vægt 31kg
LpA(lydtryk) 60.8 dB(A)
LpA(Lydkraftsniveau) 73,8dB(A)
Vibrationsværdi < 2,5 m/s
2
1. TEKNISKE SPECIFIKATIONER
UK
D
NL
F
E
P
I
S
SF
N
DK
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm BSM1010 - FBS400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm BSM1010 - FBS400 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info