wwwwww
..
ffeennddeerr..ccoomm
✧
wwwwww
..mmrrggeeaarrhheeaadd..nneett
13
FF. MIDI IN / OUT / THRU
Musical Instrument Digital Interface ports for connecting MIDI devices to
the Cyber–Twin SE™. MIDI can be used to remotely control the amplifier
and transfer presets (see Utility Mode starting on page 24 and the
appendices starting on page 26).
GG. SPDIF OUTPUT
“Sony/Phillips Digital Interface Format” output jack for connecting SPDIF
compatible equipment such as a digital recorder. Although this jack
accepts a standard RCA plug, the SPDIF OUTPUT is a digital stereo source
not compatible with other functions normally associated with RCA jacks.
HH. HEADPHONES JACK
Connection for headphones using a standard 1/4˝ stereo phone plug.
Speaker outputs (internal and rear panel jacks) are automatically muted, but
LINE OUTPUT jacks are not.
II. LINE OUTPUT
Impedance balanced XLR jacks for output to sound reinforcement and
recording equipment. Use the button to select stereo or dual mono signal.
These outputs are frequency compensated to simulate the sound of a
miked speaker.
JJ. EFFECTS LOOP
Connections for external effects devices. Connect MONO SEND to the
input of your effects device and the output of the effects device to the
MONO RETURN jack or both RETURN jacks, according to your effects
device. Use the LEVEL button to optimize the loop for your effects device
(usually –10dBv for footpedals and +4dBu for rack mounted effects).
KK. SPEAKER OUTPUT
Stereo output jacks for connecting external speaker cabinets. Speakers
must be 8–ohm minimum (per channel) and handle 65 watts minimum. Use
unshielded speaker cable of 16–gauge or heavier for connections up to 50
ft (15 m) and always turn the amplifier off before making connections.
Rear Panel Overview
